Century Components X-Series Edge pilaster set is a maple pilaster system designed for base cabinetry organizers and fillers, so it supports adjustable pull-out or storage components inside kitchen and bath base cabinets. The set uses Baltic Birch plywood pilasters, which provide a stable wooden structure for mounting pull-out hardware or shelves in cabinet interiors so layouts can be tailored to the specific cabinet run. Each pilaster is 1 inch wide and 20-7/8 inches high, giving a consistent vertical mounting surface that suits common base cabinet heights and aligns hardware along the full usable opening. The system is part of base and wall cabinet pull-out systems, so it fits into projects where organized access to cabinet contents matters. The EDGXB150FL designation identifies this specific Century Components X-Series Edge pilaster configuration for repeat ordering or matching to existing layouts.
The X-Series Edge 1 inch wide by 20-7/8 inch high maple pilasters give installers a defined vertical rail dimension, which simplifies locating brackets at working heights inside base cabinets. Baltic Birch plywood construction means fasteners for pull-out hardware seat into a layered wood core, supporting secure anchoring during cabinet use. The patented metal X-Bracket is designed to interface with these pilasters, so hardware positions track squarely along the system rather than relying on individual cabinet sidewalls. Tool-free adjustability in the X-Series Edge design lets installers reposition these brackets along the pilaster height during layout, which helps dial in clearances for adjacent doors, drawer fronts, or neighboring pull-outs. The 140-sheen conversion finish creates a smooth, finished surface on the pilasters, supporting clean movement near stored items in everyday cabinet use.
This Century Components X-Series Edge pilaster set is specified under base cabinetry organizers and fillers, so it is intended for interior use in base cabinets where organized pull-out systems are planned. The 1 inch wide by 20-7/8 inch high maple pilasters align vertically inside the cabinet, creating mounting rails for pull-out assemblies that operate as part of a broader base and wall cabinet pull-out system. Baltic Birch plywood pilasters provide a wooden substrate for interior hardware in kitchen and bath cabinet environments, integrating with other cabinet components in those spaces. Within Wurth Baer Supply offerings for kitchen and bath cabinet accessories, this pilaster set functions as the structural side element that supports adjustable storage or organizer hardware inside the cabinet footprint. The EDGXB150FL part reference connects this set directly to that interior base cabinet role.
The patented metal X-Bracket is engineered to work with the X-Series Edge pilasters, so mounting points for pull-out hardware follow a fixed relationship to the pilaster faces, which supports accurate alignment between left and right cabinet sides. Tool-free adjustability in this system means X-Brackets can be repositioned along the pilaster height without separate tools, so installers can shift hardware elevations to accommodate varying container heights or toe-kick relationships while keeping the project moving. Because the pilasters are 20-7/8 inches high, there is ample vertical span for stacking multiple hardware levels or fine-tuning a single pull-out position relative to the cabinet opening. The 140-sheen conversion finish on the pilasters helps the installed system present a finished interior appearance once hardware and storage components are mounted, which supports a professional look when the pull-out is extended. Working within the Century Components base and wall cabinet pull-out systems category, this pilaster and X-Bracket combination forms the adjustable backbone that lets storage features be placed in practical, repeatable positions along the cabinet interior.
The Century Components X-Series Edge pilaster set is a maple pilaster system using Baltic Birch plywood and metal X-Brackets to support adjustable pull-out or organizer hardware inside base cabinetry organizers and fillers.
The X-Series Edge pilasters are 20-7/8 inches high, giving a vertical rail that suits common base cabinet interiors and provides ample height for positioning pull-out hardware along the cabinet opening.
The X-Series Edge pilasters use Baltic Birch plywood, which provides a stable, layered wood core to anchor pull-out hardware inside base cabinet organizer installations.
The patented metal X-Bracket interfaces with the pilasters as a mounting point, allowing pull-out hardware to be fixed in aligned vertical positions that follow the X-Series Edge rail layout.
Tool-free adjustability in the X-Series Edge system allows installers to reposition X-Brackets along the pilasters by hand, which speeds layout changes and fine-tuning of hardware elevations inside the cabinet.
The 140-sheen conversion finish provides a smooth, finished surface on the pilasters, helping the cabinet interior look complete and supporting everyday contact near pull-out storage components.
The Century Components X-Series Edge pilaster set with 1 inch wide by 20-7/8 inch high maple pilasters, Baltic Birch plywood construction, patented metal X-Bracket, tool-free adjustability, and 140-sheen conversion finish offers a defined structure for interior base cabinet pull-out layouts. For projects built around base cabinetry organizers and fillers within kitchen and bath cabinet accessories, the EDGXB150FL X-Series Edge configuration from Wurth Baer Supply provides a repeatable framework for aligning pull-out hardware and organizing storage inside cabinet runs.
Sold In: 1 Set