Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Century Components X-Series Edge bulk pack delivers 40 maple Baltic birch pilasters at 2-1/2 inches wide by 20-7/8 inches tall, along with 80 shelf-support brackets, giving cabinet shops the hardware to outfit multiple base cabinet interiors in a single order.
Pilasters are the foundation of an adjustable-shelf interior. Mounted to the cabinet sidewall, they accept bracket clips at consistent intervals so shelves can be set and reset at different heights without drilling new holes. The 2-1/2 inch pilaster width gives installers a larger mounting surface than the narrower profiles in this family, which can be useful in face-frame applications where the cabinet side is partially obscured or where a wider bearing surface helps with alignment during installation. At 40 pilasters and 80 brackets per pack, a single bulk order covers roughly 10 complete two-pilaster cabinet setups or can be distributed across a larger run depending on the shelf count per opening.
The pilasters are cut from Baltic birch plywood, a multi-ply hardwood panel stock known for consistent thickness and minimal core voids. That matters in a pilaster because bracket clips seat against the panel face and the slot edges: a void-free core keeps the clips from rocking or loosening under a loaded shelf. The maple face gives the pilaster a clean, light appearance that reads well inside a natural or painted cabinet interior. Because the panels ship unfinished, they can be sealed, painted, or left natural to match the cabinet build.
Cabinet shops running production volume on base cabinets are the primary buyer here. Ordering pilasters in bulk reduces per-unit cost and keeps the hardware station stocked through a project rather than requiring a mid-run reorder. The 2-1/2 inch width makes this pack the right choice when the job calls for the broader profile, either by spec or by preference, rather than the 1-inch or 1-1/4 inch profiles available elsewhere in the X-Series Edge line. Designers and contractors specifying interiors for a custom kitchen build may also order this pack to stage hardware ahead of the cabinet install.
Each pack contains 40 pilasters and 80 brackets. A standard two-pilaster-per-side base cabinet setup uses four pilasters per opening, so one pack covers roughly 10 openings at that count. Actual yield depends on how many pilasters and bracket positions are used per cabinet.
Yes. The bulk pack includes 80 shelf-support brackets alongside the 40 pilasters, so no separate bracket order is needed to get started.
The X-Series Edge line is designed as a coordinated system. Check Century Components' compatibility guide to confirm that the bracket clips in this pack are interchangeable with clips used on other profiles in the same series before mixing hardware across a project.
No. The maple Baltic birch pilasters ship unfinished and can be sealed, painted, or stained to match the cabinet interior.
The X-Series Edge 2-1/2 inch bulk pack is the efficient choice for production cabinet builds where the wider pilaster profile is called for, delivering a full run's worth of hardware in a single shipment.
Sold In: 1 Package