Century Components Signature maple base organizer is a 13-3/8 inch 3-bin base cabinet organizer designed to create a dedicated pull-out zone in a base cabinet. The organizer is constructed in maple, which supports a solid feel and a cabinet-grade appearance in a kitchen run. A 140-sheen conversion finish is applied to the maple, which helps seal the wood surface and gives a smooth, cleanable finish for everyday kitchen conditions. The organizer integrates a knife block insert, which holds knives in a fixed position so blades stay separated and easy to reach when the pull-out is extended. A utensil bin within the organizer creates a defined space for tools, which keeps frequently used utensils standing upright and ready for use. Three 1-1/4 quart stainless steel canisters are part of the organizer layout, and these canisters provide metal containers sized for smaller batch ingredients or tools in the pull-out zone.
The organizer uses Blum TANDEM 100 lb soft-close slides with floor mount brackets, which means the pull-out rides on concealed undermount slides rated for substantial load while closing with a controlled, damped action. The 100 lb rating on the Blum TANDEM slides supports the combined weight of knives, utensils, and filled canisters in the base cabinet without overloading the hardware. Soft-close action on these slides slows the final part of travel, which helps the pull-out settle into the cabinet without slamming the front. Floor mount brackets are part of the slide configuration, which allows the assembly to connect down into the base cabinet floor area and establish a solid mounting point for the pull-out movement.
This Signature maple 3-bin base cabinet organizer is used inside a base cabinet as a pull-out system for knives, utensils, and stainless steel canisters. The 13-3/8 inch configuration places the organizer within the base cabinetry run, which lets the installer dedicate a specific cabinet opening to this pull-out. Maple construction with a 140-sheen conversion finish allows the unit to sit alongside finished base cabinetry while presenting a consistent interior look. The knife block insert within the organizer positions knives in a dedicated section, which turns the pull-out into a central cutting station inside the cabinet. The utensil bin adds a separate vertical compartment, which keeps spoons, spatulas, or similar tools in the same pull-out area. Three 1-1/4 quart stainless steel canisters then line up as additional container space, which can be used for small-volume storage needs aligned with that station.
The Blum TANDEM 100 lb soft-close slides used on this organizer support repeatable motion of the base pull-out under everyday loading. The 100 lb capacity gives the slide system margin for the combined weight of knives, utensils, and filled stainless steel canisters, which helps the pull-out track reliably along the slide path. Soft-close behavior at the end of travel slows the closing motion, which reduces impact at the cabinet face and supports long-term alignment of the organizer within the opening. Floor mount brackets tie the slide system into the cabinet floor zone, which creates a defined attachment surface for aligning the pull-out square to the cabinet. The organizer is designed for C-Trac, which identifies the intended track style used with this system and helps position the pull-out within the broader base cabinet hardware plan. Together, the maple body, conversion finish, integrated storage components, and Blum slide system define a base cabinet pull-out station that keeps key kitchen tools and small-volume contents in a consistent, repeatable location.
The Century Components Signature maple 13-3/8 inch organizer is a base cabinet organizer, so it is used inside a base cabinet run to create a dedicated pull-out storage station.
The Blum TANDEM 100 lb soft-close slides support the pull-out under substantial load and control closing speed, which keeps the organizer motion smooth inside the base cabinet.
The base organizer integrates a knife block insert, a utensil bin, and three 1-1/4 quart stainless steel canisters, which group knives, tools, and small-volume contents in one pull-out unit.
The 140-sheen conversion finish seals the maple surface and provides a smooth, uniform appearance, which supports a finished look and cleanable surface inside the cabinet.
The organizer uses Blum TANDEM slides with floor mount brackets, which anchor the slide system to the bottom of the base cabinet for stable pull-out travel.
The three-bin layout, combined with the knife block and utensil bin, creates separate zones so tools and small-volume contents stay organized within one base pull-out.
The Century Components SIGKBI130PF organizer brings a 13-3/8 inch Signature maple 3-bin layout, knife block insert, utensil bin, and three 1-1/4 quart stainless steel canisters together on Blum TANDEM 100 lb soft-close slides with floor mount brackets. That combination creates a defined pull-out station inside a base cabinet run, with wood construction, conversion finish, and integrated storage zones working with the soft-close slide system. For projects that call for a base cabinet organizer with knives, utensils, and small containers in one controlled pull-out, this Signature maple unit delivers a focused, cabinet-grade solution.
Sold In: 1 Each