Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Amerock concealed bi-fold hinge is built specifically for folding cabinet doors, letting two panels fold together while a self-close spring draws the assembly shut on its own. It mounts to frameless cabinets with a standard screw-on connection and opens to a wide 165 degrees for near-flat clearance when the panels are swung back.
A bi-fold cabinet door folds rather than swings in a single arc, which makes the wide opening angle especially useful. At 165 degrees, the two panels rotate far enough back to sit nearly parallel to the cabinet side, clearing the full opening so you can reach across the entire shelf without a door panel blocking the way. This makes the hinge a practical choice for appliance garages, pantry doors, and any run of base or upper cabinets where a conventional swinging door would project too far into the room. The 35mm cup bores into the back of the door, and the hinge screws to a base plate mounted to the cabinet side, ordered separately. Use a base plate matched to your cabinet construction.
The hinge is plated steel in a nickel finish, matched to the standard hardware palette used across most frameless casework. At 5-5/8 inches in length and 2-9/16 inches wide, the hinge body is sized for the folding-door geometry rather than a standard swing hinge, so the arm clears the fold without binding. The self-close spring does its work inside that geometry, pulling the assembly to a closed position each time rather than leaving a partly open panel sitting in the middle of the opening.
Cabinet shops and installers working on frameless cabinetry with folding fronts are the core audience here. Appliance garages, tambour-style pantry sections, and closet built-ins with bi-fold doors all benefit from a hinge that manages the fold and closes automatically. This hinge is sized for standard doors in the 16 to 22mm range. For doors outside that window, confirm the fit before ordering. It is sold as a pair, which covers both hinge positions on a single bi-fold door panel set.
Yes. The hinge connects to a base plate that mounts to the cabinet side, and that plate is sold separately. Select a plate matched to your frameless cabinet and the door position you need.
The cabinet type attribute specifies frameless. For face-frame bi-fold applications, look for a hinge specifically rated for face-frame mounting.
No. Self-close uses a spring to pull the door shut over the last few degrees of travel. Soft-close uses a damper to slow and cushion the door as it closes. This hinge has self-close, so it will pull the panels shut but does not dampen the close.
This product is sold as a pair, covering both hinge positions on one bi-fold panel set. For taller or heavier doors, consult the manufacturer load guidance to confirm whether additional hinges are needed.
Specify this hinge when the design calls for a frameless bi-fold door that folds fully open and springs shut on its own, with clearance to spare.