FormWood maple wood veneer sheet gives you a 48 inch wide by 96 inch long surface in a plain sliced or flat cut maple pattern, so you can face cabinets, panels, or furniture components with a consistent maple appearance across a full 4x8 field. This wood veneer sheet is built as a 2-ply backer, which pairs a maple face with a backing layer to help the sheet handle normal fabrication and bonding without feeling flimsy during layup. The maple veneer is part of FormWood's wood veneer sheets product class, so it is intended as a surfacing solution rather than a structural panel. The maple flat cut description aligns with a familiar cathedral and straight grain mix, which helps finished work visually match other flat cut maple elements on the same project. The FormWood brand identity signals a woodworking-focused sheet product aimed at shop use.
This FormWood maple veneer sheet arrives sized at 4 feet by 8 feet, so shop crews can lay out cabinet sides, door faces, and casework ends on a single sheet without splicing for typical panel dimensions. The plain sliced or flat cut maple face provides a predictable grain flow that aids in orienting cathedral and straighter grain zones where they look best on visible faces. Because the sheet is constructed as a 2-ply backer, the backing layer supports the maple face during glue spread and pressing, which helps the sheet stay manageable while it is moved from cutting to bonding steps. As a wood veneer sheet rather than a thick panel, it is intended to be laminated to a suitable substrate as part of a normal surfacing workflow.
The FormWood maple plain sliced or flat cut wood veneer sheet fits work where a maple appearance is needed over a 48 inch by 96 inch area, such as cabinet fronts, end panels, and other casework surfaces that follow standard 4x8 layout. The maple flat cut grain structure lines up with jobs that already use flat cut maple doors, frames, or trim, so installers can extend that same look onto large panels. As part of the wood veneer sheets category, this sheet serves as the visible maple face in assemblies where a separate core panel carries the structural load, which keeps the veneer dedicated to appearance rather than strength. The FormWood branding ties it to a manufacturer focused on veneer sheet surfacing products used in woodworking environments.
The 48 inch width and 96 inch length of this FormWood veneer sheet simplify pattern planning across a whole run of casework, because crews can pull multiple fronts or sides from the same sheet and hold a consistent maple tone and grain movement. The 2-ply backer build gives the veneer extra body compared to a single-ply face, which helps it stay flatter during cutting and adhesive application, supporting predictable contact with substrate cores. The flat cut maple face, described as plain sliced, signals a traditional maple look that can be repeated on follow-up orders by referencing the MAPPN38RB4T manufacturer part number, helping shops maintain continuity on phased projects. Its role as a wood veneer sheet aligns it with edgebanding and surfacing work, so fabricators can coordinate this sheet with other surfacing materials in the same category for cohesive finished assemblies.
The FormWood maple wood veneer sheet MAPPN38RB4T is 48 inches wide by 96 inches long, which matches a standard 4x8 layout used for cabinet and panel surfacing.
The FormWood maple veneer uses plain sliced or flat cut grain, which produces a familiar maple pattern that coordinates with other flat cut maple doors, frames, and trim on the same project.
The FormWood maple veneer sheet uses 2-ply backer construction, pairing the maple face with a backing layer so the sheet handles more steadily during cutting, handling, and bonding.
This FormWood maple item is classified as a wood veneer sheet, so it serves as a surfacing layer over another substrate rather than as a stand-alone structural panel.
As a wood veneer sheet in the veneer sheets category, this FormWood maple product is used to give cabinets, casework, and panels a maple face over core materials.
The MAPPN38RB4T manufacturer part number uniquely identifies this FormWood maple flat cut 4x8 2-ply veneer sheet, aiding consistent reordering for matching projects.
The FormWood maple wood veneer sheet in a 48 inch by 96 inch format provides a flat cut maple face sized for common cabinet and panel work, so shops can plan surfacing around a standard 4x8 field. Its 2-ply backer construction supports the maple face during normal handling and bonding, which helps crews move from cutting to lamination steps with a sheet built for veneer work. With the MAPPN38RB4T part number tied to this exact plain sliced maple configuration, project managers can align current jobs and repeat orders around the same visual specification through Wurth Baer Supply.
Sold In: 1 Each