Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune SN-120BL is an L-profile edge pull from the SN Edge Series, mounting on 1-3/4 inch (45 mm) centers and designed for cabinet doors and drawer fronts where the hardware needs to stay compact without losing grip clearance.
The 1-3/4 inch (45 mm) center-to-center is the defining selection dimension here. That spacing suits narrow drawer fronts, thin door rails, and any situation where a wider hole pattern would crowd the edge of the panel or run too close to an adjacent frame member. It also works well on drawer stacks where the fronts are shallow in height and a pull drilled at a wider pattern would sit too close to the top or bottom edge. For a renovation matching existing hardware, confirm the hole spacing in the existing fronts before ordering.
The pull is machined from 304 stainless steel, a grade with good corrosion resistance in dry interior environments. The Matte Black finish gives the stainless substrate a flat, even surface that does not pick up glare under kitchen or display lighting. The L-profile cross-section means the grip face is parallel to the door, which keeps the hardware from reading as a protruding object and instead lets it sit flush to the plane of the front until the hand reaches for it. Three mounting holes distribute the fastening load across the 4-3/4 inch span rather than concentrating it at two points, which suits the longer body of this pull.
This pull works best in contemporary and minimalist kitchens, bath vanities, and furniture pieces where hardware is expected to be present but not prominent. The matte black stainless reads as a material rather than a color, which means it coordinates with other matte or brushed metals in the same space without demanding a perfect finish match. Cabinet shops specifying a full run of drawer hardware at a consistent 45 mm spacing will find the SN series stocked in multiple sizes, so a single project can be completed from one collection. Designers working on dark cabinetry programs will find the flat black finish disappears against near-black or charcoal fronts, effectively making the hardware invisible until it is used.
The 4-3/4 inch body is long relative to the 1-3/4 inch hole spacing, so a third mounting point in the center prevents the pull from flexing or rocking under use. It also distributes the load more evenly across the front.
Yes, for dry interior kitchen environments. 304 stainless steel resists moisture and common household cleaners well in indoor applications.
A matte surface hides prints and smudges better than a polished one, which makes it a practical choice in high-use kitchens.
The pull stands 1-1/2 inches (38 mm) off the face of the front, which gives comfortable hand clearance for a full grip along the bar.
When the hole pattern needs to stay tight and the finish needs to stay flat, the SN-120BL delivers both in a single pull built to Sugatsune's SN Edge Series standard.
Sold In: 1 Each
