Emtek Traditonal Cup Pull 3 inch CC gives cabinets a defined handhold using a shaped cup profile, so drawers are easy to grip in one motion. The 3 inch center-to-center layout establishes a fixed drilling spread, which helps installers match existing 3 inch hole patterns on drawers or doors. The polished brass finish creates a bright metal surface, so the pull reads clearly against many cabinet materials in shops or finished spaces. The Emtek branding ties the pull to a recognized decorative hardware line, which supports consistent styling across multiple cabinets. As part of the Handles and Pulls class, this cup pull functions as the primary touchpoint on the drawer front, translating hand force directly to the slide movement. The 86123US3 manufacturer part number identifies this exact polished brass version, which helps buyers reorder the same pull when adding cabinets or finishing later phases.
The 3 inch center-to-center specification defines exactly where mounting holes land relative to the pull body, giving installers a clear target for drilling new cabinet fronts. This spacing allows cabinet shops to use existing 3 inch drilling patterns across different projects without reworking jigs. As a cup pull from the Handles and Pulls category, the part is designed to fasten through the drawer or door front, so the pull face sits flush against the exterior surface. Aligning the polished brass cup profile level with the drawer edge establishes a straight pull line, which supports smooth drawer travel when users apply force. The Emtek designation on this pull keeps dimensions and appearance consistent from piece to piece, which helps maintain alignment when multiple installs share the same hardware line.
This Emtek Traditonal Cup Pull, 3 inch CC, Polished Brass - 86123US3, is defined for cabinet and drawer fronts where a horizontal handhold is needed. The 3 inch center-to-center mounting dimension matches a common cabinetry standard, so it works on new drawer fronts laid out around that spread. As part of the Decorative Hardware & Moldings category with a Handles and Pulls class, this cup pull serves as the exterior hardware that occupants grab every day, translating the polished brass finish into a visible design element on each face. The cup form creates a pocket that fingers can slide under from above, guiding the pull of the drawer in a straight line and helping the force stay centered on the slides. Across banks of drawers, repeating the 86123US3 part number keeps the project visually unified wherever this polished brass Emtek cup pull is used.
The stated 3 inch CC layout on the Emtek 86123US3 cup pull gives installers a defined measurement for jigs and drilling templates, which reduces layout variation between cabinets on multi-unit runs. Because this pull is identified specifically as an Emtek Traditonal Cup Pull in polished brass, each unit presents the same metal color and profile, supporting consistent lines across full kitchens or commercial casework. The Handles and Pulls classification signals that this part is meant for front-facing installation, so it occupies the same visual band on each drawer front and keeps hand reach predictable. Using the same manufacturer part number wherever this style appears simplifies ordering for later phases, because the 86123US3 code points directly to the same 3 inch center-to-center polished brass cup pull without dimension guessing.
The Emtek Traditonal Cup Pull, 3 inch CC, Polished Brass - 86123US3, uses a 3 inch center-to-center distance between mounting points, which sets the drilling spread for installing it on cabinet or drawer fronts.
The Emtek Traditonal Cup Pull, 3 inch CC, Polished Brass - 86123US3, is categorized under Handles and Pulls for cabinet and drawer fronts, so it functions as the main handhold on those faces.
The Emtek Traditonal Cup Pull, 3 inch CC, Polished Brass - 86123US3, uses a polished brass finish, giving the visible hardware a bright metal appearance on cabinet or drawer surfaces.
The Emtek Traditonal Cup Pull, 3 inch CC, Polished Brass - 86123US3, has a cup-style profile that creates a recessed grip, guiding fingers under the lip to pull drawers in a straight, controlled line.
The Emtek manufacturer part number 86123US3 uniquely identifies this Traditonal Cup Pull, 3 inch CC, Polished Brass version, which supports accurate reordering for matching installations.
The Decorative Hardware & Moldings category and Handles and Pulls class indicate the Emtek Traditonal Cup Pull, 3 inch CC, Polished Brass - 86123US3, is meant as visible working hardware on cabinet exteriors.
The Emtek Traditonal Cup Pull, 3 inch CC, Polished Brass - 86123US3, aligns with projects laid out around a 3 inch center-to-center drilling pattern, so it fits established cabinet shop practices. The polished brass finish and cup form turn each drawer front into a consistent, easy-to-grab touchpoint on completed casework. For cabinet runs built around Emtek decorative hardware, this specific 86123US3 part number keeps style, finish, and mounting dimensions uniform across phases.