Emtek Traditional Wire Pull 4"CC Satin Nickel identifies this pull as a 4 inch center-to-center Emtek handle in a satin nickel finish, so cabinet and drawer layouts can be planned around that mounting spread and visual look on new or existing work.
The product name Emtek Traditional Wire Pull, 4"CC, Satin Nickel - 86133US15 ties this pull to part number 86133US15, which helps match it to drawings, hardware schedules, or reorders where the exact style and finish are already specified.
The SAP description TRADITIONAL WIRE PULL, 4'CC,SN restates the same 4 inch center-to-center dimension and satin nickel finish, keeping the critical size and finish details consistent across documents so there is less confusion when coordinating with shop notes.
The web description N/D WIRE PULL 4' C-C US15, 86133US15 confirms that this is a wire-style pull with a 4 inch center-to-center drilling pattern in finish code US15, which aligns with satin nickel and supports consistent appearance with other US15 components in the project.
The stated 4"CC and 4' C-C center-to-center dimension tells you the mounting holes are spaced 4 inches apart, which matters when laying out drilling jigs or aligning to existing holes on replacement cabinet doors or drawer fronts.
Because the product is described as a Traditional Wire Pull, installers can expect a handle-type pull that mounts at two points along that 4 inch spread, offering a familiar installation approach similar to other cabinet handles that use a standard center-to-center pattern.
The satin nickel finish designation SN and US15 means this pull is finished to a satin nickel standard, so it visually coordinates with other satin nickel components during installation, avoiding mismatched tones between adjacent pulls on a run of cabinets.
The manufacturer part number 86133US15 associated with this pull anchors these installation-related details to a single catalog reference, so field staff and office staff are talking about the same 4 inch center-to-center satin nickel pull when planning mounting locations.
The category Decorative Hardware & Moldings|Handles and Pulls defines this item as a handle-style pull suited to cabinet and furniture applications, so it can be specified anywhere a functional hand grip is needed on doors or drawers.
Being in the product class Handles and Pulls, Emtek indicates that this Traditional Wire Pull works alongside other Emtek handles and pulls, allowing designers to use this 4 inch center-to-center piece where a wire profile is desired in a broader Emtek hardware plan.
The description N/D WIRE PULL 4' C-C US15 identifies it as a wire pull with a 4 inch center-to-center layout in US15 satin nickel, which suits projects targeting a satin nickel appearance across pulls while still using a compact, linear handle footprint.
The specified satin nickel finish, expressed as SN and US15, places this pull among satin nickel decorative hardware choices, making it practical for kitchens, baths, and casework where satin nickel faucets, hinges, or other fittings are already part of the design.
The Emtek brand name linked to this Traditional Wire Pull positions it within a recognized decorative hardware range, so it can be confidently specified on drawings where Emtek hardware is called out for handles and pulls.
The manufacturer part number 86133US15 ties together the Traditional Wire Pull style, 4 inch center-to-center drilling, and satin nickel finish, giving shops a single reference when setting up drilling patterns and finish schedules for repeated cabinet runs.
The 4"CC dimension described in both the product name and supporting descriptions keeps the mounting spread consistent across documentation, which helps avoid layout errors when doors or drawer fronts are pre-drilled before final hardware staging.
The satin nickel designation US15 aligns with the SN notation in TRADITIONAL WIRE PULL, 4'CC,SN, so finish information matches between ordering systems and field use, reducing the chance of mixing different nickel tones on adjacent cabinets.
Describing the item as a Traditional Wire Pull clarifies that it is a wire-form handle, which informs expectations about the pull's footprint and hand clearance when drafters and installers consider spacing near adjacent doors, drawers, or trim.
The SAP description TRADITIONAL WIRE PULL, 4'CC,SN mirrors the key functional details found in the product name, which supports consistent communication from purchasing through installation whenever this specific 4 inch center-to-center satin nickel pull is required.
The web description N/D WIRE PULL 4' C-C US15, 86133US15 reiterates the 4 inch center-to-center mounting and US15 finish code together with the part number, reinforcing the link between catalog data and practical layout choices on the jobsite.
The Emtek Traditional Wire Pull, 4"CC, Satin Nickel - 86133US15 has a 4 inch center-to-center mounting distance, so drilling layouts can follow a 4 inch spread between mounting holes on doors and drawers.
The 86133US15 wire pull is described as SN and US15, identifying it as satin nickel, which helps it visually coordinate with other satin nickel hardware and fittings in the same project.
This item is in Decorative Hardware & Moldings|Handles and Pulls and in the product class Handles and Pulls, Emtek, indicating it is intended as a handle-style pull for cabinet and furniture applications.
The term Traditional Wire Pull identifies the piece as a wire-style handle, which suggests a compact, linear grip suitable for cabinet doors and drawers where a straightforward pull profile is desired.
The part number 86133US15 uniquely links the Traditional Wire Pull design, 4 inch center-to-center sizing, and satin nickel finish, making specification, ordering, and reordering straightforward across project documents.
The web description lists US15 for this wire pull, and the SAP description lists SN, both pointing to a satin nickel finish that matches other US15 satin nickel components.
The Emtek Traditional Wire Pull, 4"CC, Satin Nickel - 86133US15 combines a 4 inch center-to-center layout with a satin nickel finish, making it a practical choice when cabinets are drilled on a 4 inch spread and the design calls for satin nickel hardware.
With its Traditional Wire Pull identity and classification under Decorative Hardware & Moldings|Handles and Pulls, this Emtek piece suits cabinet and furniture projects that specify Emtek handles and pulls in satin nickel, supporting consistent layouts and finishes across the job.