Emtek Traditional Cup Pull identifies this part as a cup-style cabinet pull from Emtek, so it suits projects that call for a traditional, open-bottom grip on doors or drawers. The product name states a 4 inch CC layout, meaning the mounting holes are set on a 4 inch center-to-center pattern, which fits layouts drilled for that spacing on face frames or drawer fronts. The polished chrome detail in the name defines the finish as a bright chrome look, so it visually matches other US26 polished chrome decorative hardware on the same run. The Emtek brand reference in the product name and product class ties this pull into the Emtek decorative hardware line, so it pairs consistently with other Emtek handles and pulls when lining up a full job. The cup pull identity in the web description confirms a cup profile that gives fingers a recessed grip area across the edge of a drawer or cabinet face.
The 4 inch CC detail in the product name establishes the fixed distance between mounting points, so drilling or existing bores must follow that 4 inch pattern for the pull to sit square on the face. Because the part is identified as a cup pull, the body expects to sit over those two fastener points with the open side facing the user, which positions the grip along the drawer or door edge for straightforward access. The Handles and Pulls category placement confirms that this part is intended for standard cabinet pull mounting, so it can be laid out in typical pull positions on doors or drawers without special brackets or nonstandard patterns. The Emtek branding in the product data ties this pull to common Emtek drilling layouts, which supports consistent hole spacing when multiple Emtek pulls are used across the same installation.
The Traditional Cup Pull description in both the product name and SAP text identifies this part as suited to cabinets or furniture needing a traditional, cup-style grip, so it works on face-frame cabinets or frameless fronts where a hand can approach from above. The 4 inch CC callout in the name supports use on medium-width drawer fronts or doors where a 4 inch spread looks proportional, helping runs of cabinets read consistently. The polished chrome US26 finish noted in the name aligns this pull with polished chrome hinges, knobs, and other decorative hardware, so it fits projects built around a chrome hardware package. Being part of the Emtek Handles and Pulls family signals that this pull can be selected alongside Emtek knobs and other pulls, giving designers and installers a way to keep hardware styling and finish unified from base cabinets up to wall units.
The explicit 4 inch CC specification in the product name gives installers a clear drilling dimension, which supports the use of jigs or CNC programs set to a 4 inch pattern for repeatable cabinet production. The cup pull form referenced in the Traditional Cup Pull name means the pull spans between the two mounting points with a continuous cup profile, creating a single grab location that feels consistent from one drawer to the next. The polished chrome US26 finish called out in the product name identifies a reflective chrome surface, so when multiple pulls are lined up along a bank of cabinets their finish reads uniformly under the same lighting. The Emtek identification in the product class links this part to the wider Emtek line, allowing hardware schedules to specify this exact pull by the 86173US26 manufacturer part number for accurate ordering and replacement. The Handles and Pulls category assignment confirms its role as a working pull, so it can be repeated across a kitchen, bath, or casework run as the main operating hardware without needing a secondary grip solution.
The Emtek Traditional Cup Pull uses a 4 inch center-to-center mounting pattern, so hole locations need to match a 4 inch spacing on the cabinet or drawer front.
The 86173US26 cup pull is specified in polished chrome, noted as US26, so it aligns visually with other US26 polished chrome decorative hardware on the project.
This Emtek cup pull is categorized under Handles and Pulls in decorative hardware, so it functions as primary operating hardware on cabinet doors and drawers.
The Traditional Cup Pull style provides a recessed cup-shaped grip, so fingers pull from underneath along the cabinet edge rather than around a protruding bar.
The 86173US26 cup pull belongs to the Emtek brand decorative hardware line, so it coordinates with other Emtek handles and pulls on the same job.
The 4 inch CC layout gives a fixed drilling dimension, so jigs, templates, or CNC programs can repeat the same spacing across multiple cabinet fronts.
The Emtek Traditional Cup Pull, 4 inch CC, Polished Chrome - 86173US26, combines a defined 4 inch center-to-center pattern with a traditional cup profile, so it suits cabinet runs planned around that spacing. The polished chrome US26 finish ties directly into polished chrome hardware schemes, giving designers and installers a clearly identified pull that matches other US26 components. With its placement in the Emtek Handles and Pulls category and its specific 86173US26 part number, this pull can be specified confidently wherever a traditional cup pull look and a 4 inch mounting layout are required across a project.