Emtek Contemporary Orbit Pull gives cabinets a defined pulling point, so doors and drawers open with a consistent hand position. The 3-1/2 inch center-to-center layout establishes a fixed drilling pattern, helping installers repeat hole placement accurately from door to door on a bank of cabinets. As a cabinet pull in Emtek's decorative hardware and moldings category, it serves as the main touchpoint on the front of the cabinet, affecting both operation and appearance during daily use in a shop-built or on-site installation.
The polished nickel finish, identified as US14, creates a bright metal surface that visually ties together multiple fronts when the same pull is used throughout a run. The Emtek brand and Emtek product class for handles and pulls signal that this pull aligns with other Emtek decorative hardware choices on the job. The 86257US14 manufacturer part number clearly identifies this exact version for ordering and re-ordering consistency when expanding an existing layout.
The 3-1/2 inch center-to-center dimension on this Emtek cabinet pull defines the exact spacing between the two mounting points, guiding hole locations on the door or drawer front so the pull sits square and level. This fixed spacing aligns well with jig-based drilling or measured layouts, which is useful when aligning multiple fronts in a kitchen or commercial bank of cabinets. As part of the handles and pulls category, this piece is designed to be mounted on cabinet faces, where consistent placement and repeatable spacing influence how clean the final run looks along the installation.
The Contemporary Orbit styling directs the user to a central gripping area, which supports predictable hand placement when opening and closing cabinet fronts throughout daily operation.
The Emtek Contemporary Orbit Pull, identified by part number 86257US14, is used on cabinet doors and drawer fronts where a 3-1/2 inch center-to-center pull is specified. In decorative hardware and moldings, it fills the role of a primary operating handle, giving users a defined point to grasp when accessing cabinet interiors. On built-in cabinets, shop-fabricated casework, or furniture-style pieces, this pull helps standardize the hardware look across multiple units.
Because this pull sits in the Emtek handles and pulls product class, it works within the broader Emtek decorative hardware family when a project calls for coordinating pieces. The polished nickel US14 finish makes the pull suited to jobs where a bright metal tone is part of the design intent, such as matching other polished nickel decorative hardware in the same room. Using the same Contemporary Orbit profile on all fronts contributes to a uniform visual line from cabinet to cabinet along a wall or island.
The 3-1/2 inch center-to-center measurement directly affects drilling and layout, because every front using this pull shares the same hole spacing, which reduces layout variation across a long run of cabinets. For installers working with templates or jigs, that measurement allows faster repetition, helping maintain consistent alignment from the top row of wall cabinets down to base cabinet drawers.
The polished nickel US14 finish not only defines the appearance but also helps visually tie this pull to other polished nickel decorative hardware elements in the project, which simplifies hardware selection when a uniform finish is required. The Emtek classification under handles and pulls and the Emtek name itself connect this product to a known decorative hardware line, which aids in specifying companion pieces from the same source.
The manufacturer part number 86257US14 gives a unique reference for the Contemporary Orbit Pull in this size and finish, which keeps ordering straightforward when matching hardware on extensions, replacements, or phased projects over time.
The Emtek Contemporary Orbit Pull has a 3-1/2 inch center-to-center dimension, so hole spacing on the cabinet front follows that 3-1/2 inch distance for consistent alignment across multiple fronts.
The polished nickel US14 finish provides a bright metal look that visually coordinates this pull with other polished nickel decorative hardware on the same project for a unified appearance.
The Emtek Contemporary Orbit Pull is installed on cabinet doors and drawer fronts as a handles and pulls component, giving a defined gripping point for opening and closing cabinets.
The 86257US14 part number identifies this specific Contemporary Orbit Pull configuration, combining the Emtek design, 3-1/2 inch center-to-center size, and polished nickel US14 finish for accurate ordering.
The 3-1/2 inch center-to-center layout gives a fixed drilling distance, which suits jig-based or measured layouts and helps keep multiple pulls level and evenly spaced on cabinet runs.
This pull is part of Emtek handles and pulls within decorative hardware and moldings, so it can be selected to coordinate with other Emtek pieces in the same project.
The Emtek Contemporary Orbit Pull, 3-1/2 inch center-to-center in polished nickel US14, gives cabinet projects a defined drilling pattern and a unified metal finish. Using the 86257US14 part number ties each order to the same Emtek design, size, and finish, which supports continuity when outfitting full cabinet runs or expanding an existing installation. For cabinet work that calls for coordinated handles and pulls within Emtek decorative hardware and moldings, this pull provides a clearly specified option built around a 3-1/2 inch center-to-center layout.