Emtek Geometric Rectangular Pull 4 CC ORB

Emtek Geometric Rectangular Pull For Cabinets

Emtek Geometric Rectangular Pull gives you a clean, linear handle option for cabinets and drawers when you need a consistent, modern look across a run of fronts. The pull is identified as a Geometric Rectangular Pull in the product data, so its shape stays simple and square-edged for straightforward alignment against cabinet faces. The 4 inch C-C dimension, expressed as 4"CC and 4' C-C in the data, sets the spacing between mounting points, which helps match existing drilling patterns on many projects. The oil rubbed bronze finish, specified as ORB and US10B, provides a dark metallic tone that suits jobs calling for a warmer cabinet hardware color. The Emtek brand designation signals this pull belongs to the Emtek decorative hardware line, so it pairs with other Emtek items labeled Handles and Pulls for a coordinated installation on doors and drawers.

Key Details Of This Emtek Cabinet Pull

• The product name lists a 4 inch C-C size, described as 4"CC and 4' C-C, which sets the center-to-center mounting distance so you can line up the pull with standard 4 inch boring layouts on cabinet doors and drawers.
• The description calls the product a Geometric Rectangular Pull, so the form stays straight and rectangular, helping you create tight visual lines across multiple fronts when hardware alignment and sightlines are important on a project.
• The finish is recorded as oil rubbed bronze in the product name and as ORB and US10B in the codes, giving you a dark bronze color option that works where a deeper, more traditional metal tone is preferred on cabinets.
• The category is Decorative Hardware & Moldings|Handles and Pulls, placing this item firmly in the handles and pulls class so it functions as a primary gripping point on cabinet doors or drawer fronts rather than as trim or nonfunctional hardware.
• The brand is identified as Emtek with a manufacturer part number 86301US10B, which ties this pull to the Emtek product family so you can specify matching Emtek handles and pulls across a project using the same numbering convention.

Mounting Fit Based On 4 Inch C-C Layout

The 4 inch C-C dimension, shown as 4"CC and 4' C-C, defines how this Emtek pull fits onto cabinet faces by fixing the distance between its two mounting points. That spacing aligns with many cabinet boring patterns that use 4 inch on-center holes, so it helps when replacing existing hardware drilled to that layout. Because the pull is classified under Handles and Pulls in Decorative Hardware & Moldings, it is intended to act as a working handle on doors and drawers, letting you plan hole locations around a functional grip point. The rectangular shape noted in the product description supports straight, parallel mounting relative to door or drawer edges, which can reduce visual twist when several pulls are installed in a row.

Using This Rectangular Pull In Real Projects

Where This Emtek Rectangular Pull Performs Well

The Emtek Geometric Rectangular Pull is identified specifically as a pull within the Handles and Pulls class, so it is suited to cabinet doors and drawers that need a defined gripping surface. Its 4 inch C-C spacing, recorded as 4"CC and 4' C-C, aligns with a common center-to-center dimension, which helps on jobs where cabinets are already drilled at that spread or where new drilling will follow a 4 inch layout. The oil rubbed bronze finish, referenced as ORB and US10B, delivers a dark bronze appearance, which is useful on projects targeting a warm, traditional, or transitional hardware tone rather than a bright metal look. Because the shape is described as Geometric Rectangular, the pull presents straight, flat lines that work in designs emphasizing rectangular cabinet rail and stile profiles or slab drawer fronts. The Emtek brand designation and part number 86301US10B link this piece to the Emtek decorative hardware family, supporting projects where all visible handles and pulls are specified from the same manufacturer series.

Details That Support Consistent, Repeatable Installations

The clearly stated 4 inch C-C measurement, noted as 4"CC and 4' C-C, gives installers a fixed reference for hole spacing, which supports jigs and templates set to that dimension for repetitive drilling across a kitchen or bank of casework. Listing the product as a Geometric Rectangular Pull defines the basic form, so installers can visually register the straight sides parallel to door edges or drawer top lines for consistent alignment. The oil rubbed bronze / US10B finish designation keeps the surface appearance predictable from pull to pull, which is important when hardware is installed in continuous runs where color and sheen need to match. Being categorized under Decorative Hardware & Moldings|Handles and Pulls clarifies that this component serves as a functional handle rather than purely decorative trim, helping layout decisions focus on reach, hand clearance, and symmetrical placement on doors and drawers. The manufacturer part number 86301US10B further standardizes ordering and reordering for additional cabinets or later phases using the same geometry and finish.

Common Questions About The Emtek 86301US10B Pull

Select This Pull For 4 Inch C-C Cabinet Runs

The Emtek Geometric Rectangular Pull, identified as 86301US10B, combines a 4 inch C-C layout with a straightforward rectangular form, making it practical wherever cabinets or drawers are drilled on a 4 inch center spacing. Its oil rubbed bronze / US10B finish delivers the dark bronze tone documented in the product data, supporting projects built around that color family. As part of the Emtek Handles and Pulls decorative hardware category, this pull fits into jobs that call for coordinated Emtek cabinet hardware across multiple openings. For cabinetry planned around a 4"CC or 4' C-C handle pattern with a geometric rectangular profile, this pull provides a matching Emtek option.