Emtek geometric rectangular pull 4 inch CC satin nickel identifies this pull as a 4 inch center-to-center handle in a satin nickel finish, so it suits layouts built around a 4 inch drill pattern while presenting a consistent satin nickel look across the installation. The Emtek branding places this pull in the Emtek decorative hardware and moldings range, giving installers a recognizable source when matching other Emtek handles and pulls on a project. Its geometric rectangular pull form provides a straight, clean shape that lines up easily with cabinet door and drawer edges for a simple visual alignment during layout. Being part of the handles and pulls product class means this piece is intended as a working pull for doors or drawers, not a purely decorative trim, so it can serve as the primary grasp point on frequently used casework. The satin nickel finish description ties this pull to satin nickel design schemes, helping projects maintain finish continuity on visible hardware runs.
The 4 inch CC notation in the Emtek geometric rectangular pull name defines the center-to-center spacing between the two mounting points, so installers can layout and drill cabinet fronts using a 4 inch template or jig for consistent handle placement. Because it belongs to the handles and pulls category, this piece is designed to sit flat against the door or drawer face, simplifying alignment: once the 4 inch spaced holes are drilled, the rectangular profile naturally aligns parallel to the cabinet edge. The satin nickel reference in the description supports use on satin nickel hardware runs, letting installers mount this pull where existing or planned hinges and other pulls are already specified in satin nickel.
The classification as decorative hardware and moldings places this Emtek geometric rectangular pull in visible cabinet and furniture applications where appearance matters alongside function, so it suits doors and drawers in kitchens, baths, or built-ins needing a finished look. Its handles and pulls product class means it is intended as the main gripping point rather than a trim plate, so it can be laid out in primary reach zones on frequently operated fronts. The 4 inch CC measurement supports use on casework where other hardware is already set on a 4 inch center pattern, helping maintain alignment from cabinet to cabinet. The satin nickel callout ties this pull into satin nickel hardware packages, so it can be specified across a room to keep all visible pulls reading as a single coordinated series.
The manufacturer part number 86301US15 gives this rectangular pull a single, trackable ID, so shops can document it on drawings or cut sheets and call out the same pull whenever cabinets are expanded or sections are replaced. Because the 4 inch CC spacing is fixed, existing fronts drilled on a 4 inch pattern can accept this pull as a direct fit, allowing straightforward swap-outs when updating styles while retaining the same drilling. The geometric rectangular pull description signals a straight bar-style geometry, which helps installers line edges by eye with door rails or drawer fronts for uniform reveal lines along a bank of cabinets. Being cataloged under Emtek handles and pulls connects this item with other Emtek pieces, so designers can keep within a single brand family when building coordinated hardware schedules for larger millwork packages.
The Emtek geometric rectangular pull 4 inch CC satin nickel has mounting holes spaced 4 inches apart center-to-center, so drilling on a 4 inch pattern positions the pull correctly on doors or drawers.
The satin nickel note identifies a nickel-toned finish with a muted sheen, so this pull aligns visually with other satin nickel hardware specified on the same cabinetry run.
The product is listed in the handles and pulls category, so it is intended to function as a working pull on cabinet doors or drawers rather than as a purely decorative trim.
The geometric rectangular pull shape provides straight edges, so installers can sight along the bar to align it parallel with cabinet edges for consistent visual lines.
The 86301US15 manufacturer part number uniquely identifies this pull, so shops can specify, order, and later reorder the exact same model for matching work.
Being categorized as decorative hardware and moldings indicates this pull is meant for visible cabinet and furniture surfaces, so it suits finished casework where appearance and function both matter.
The Emtek geometric rectangular pull 4 inch CC satin nickel pairs a defined 4 inch center-to-center layout with a satin nickel finish, so it fits projects built around that hole spacing and finish scheme. Its role in the Emtek handles and pulls class confirms it is designed as a working cabinet pull, suitable for doors or drawers that see regular use. The geometric rectangular form gives clean lines that support straightforward alignment along cabinet edges on multi-door runs. For cabinet shops and installers standardizing on Emtek decorative hardware and moldings, this pull and its 86301US15 identifier provide a repeatable choice that can be documented and specified across drawings and orders.