Emtek geometric rectangular pull defines this piece as a modern, straight-edged handle that gives cabinet and drawer fronts a clean, linear look, which suits projects that favor simple geometry over ornate profiles. The 6 inch center to center sizing sets the distance between mounting holes, which helps match this pull to existing drilled fronts or guides boring patterns on new work. The satin nickel finish provides a muted metallic surface, which supports designs aiming for a contemporary feel without high-gloss reflection on cabinet runs. The pull belongs to the Emtek decorative hardware and moldings category, specifically in handles and pulls, which positions it as a primary touchpoint on doors or drawers instead of a trim accent. The Emtek brand identity ties this part to a focused hardware line, which helps maintain visual consistency when the same style is repeated across a full bank of cabinets.
The 6 inch center to center measurement controls the basic mounting geometry, which lets installers align this pull with common wider drawer fronts or taller cabinet doors where a longer grip looks proportional. The rectangular shape defines straight, parallel edges, which helps with visual alignment along rail lines and door edges so runs of hardware track cleanly across a kitchen or bank of casework. Placement along the stile or drawer front follows that fixed hole spacing, which can simplify jig setup for repetitive boring on job sites or in the shop. Because this pull is part of the handles and pulls class, it is suited to positions where a full-hand grip is expected, which supports everyday cabinet door and drawer operation in woodworking projects.
The Emtek geometric rectangular pull, identified as 86302US15, fits projects that call for a consistent, linear handle across multiple cabinet doors and drawers, which keeps hardware lines straight and visually connected. The 6 inch center to center dimension suits wider fronts such as large drawers or tall pantry doors, which benefits layouts where a longer pull balances the scale of the panel. The satin nickel finish ties this pull to other satin nickel decorative hardware in the space, which helps installers carry one finish from cabinet faces to adjacent hardware zones. Because the pull sits in the decorative hardware and moldings handles and pulls category, it serves as a primary operating handle on furniture-style pieces as well as built-in casework. The geometric rectangular profile keeps the look uniform from one cabinet to the next, which supports designs that repeat the same pull across an entire room.
The specified 6 inch center to center size gives a fixed drilling reference, which lets shops build jigs or use boring equipment that repeats the same spacing for every cabinet front using this pull. The rectangular form defines clear horizontal and vertical edges, which helps installers visually check alignment relative to door rails or drawer top edges so hardware lines stay straight along a run. The satin nickel finish marks this as a single, consistent surface treatment, which avoids finish variation when multiple pulls of the same 86302US15 part are used together. Having the Emtek name and exact manufacturer part number simplifies ordering all pulls from the same source, which supports projects that may expand later while still needing the same hardware style. The placement of this pull as part of a handles and pulls class ensures it is intended for frequent gripping, which aligns with use on everyday-access cabinets and drawers in woodworking installations.
The Emtek geometric rectangular pull suits cabinet doors and drawers that benefit from a straight, linear handle, which matches square-edged designs and slab-style fronts in woodworking projects.
The 6 inch center to center measurement sets the exact distance between mounting holes, which guides drilling layouts and helps match existing cabinet fronts already bored to that spacing.
The satin nickel finish on this pull provides a muted metallic look, which coordinates with other satin nickel hardware and supports contemporary or transitional cabinet styles.
The 86302US15 part number uniquely identifies this Emtek geometric rectangular pull, which simplifies specifying, ordering, and reordering the same hardware for future cabinet work.
This Emtek pull is listed in the handles and pulls category, which positions it as a primary operating handle for cabinet doors and drawers in decorative hardware installations.
The geometric rectangular shape provides straight edges, which makes it easier to align the pull parallel to cabinet rails and edges for consistent, repeatable hardware positioning.
The Emtek geometric rectangular pull with 6 inch center to center sizing and satin nickel finish offers a defined shape and measurement, which helps installers plan consistent layouts across cabinets. Selecting the 86302US15 part number keeps the visual style and finish aligned wherever the pull is used. For projects that rely on straight lines, repeated drilling patterns, and coordinated decorative hardware and moldings, this Emtek cabinet pull provides a clear specification that supports efficient cabinet and drawer hardware planning.