Emtek Urban Modern Mod Hex Pull gives cabinets a defined, modern grip point that helps doors and drawers operate in a controlled way. The Emtek brand ties this pull to a known decorative hardware line, which supports consistent hardware selection across a project. The Urban Modern Mod Hex identity signals a hex-influenced form, which creates clear edges to catch the hand when opening and closing cabinetry. Being classified under Handles and Pulls means this piece is intended as the primary touch point on cabinet fronts rather than as a hinge or internal component. Placement as Decorative Hardware & Moldings shows it is designed for visible installations where appearance matters alongside function. The manufacturer part number 86459US15 provides a precise reference for reorders or matching pulls across multiple rooms, which helps maintain a unified look during phased upgrades or future additions.
The 3-1/2 inch C-C dimension on this pull defines the exact distance between the two mounting points, which allows installers to set up drilling jigs or templates for repeatable hole placement across multiple doors and drawers. Because this measurement is standard within the product description, it supports using consistent spacing when swapping this pull into an existing layout that already uses 3-1/2 inch hole centers. The satin nickel designation identifies the visual finish, which matters when aligning the pull with other satin nickel hardware in the same installation area. Being part of the Handles and Pulls category confirms it is intended to mount on cabinet faces, which keeps layout decisions focused on front-of-cabinet ergonomics and visual lines rather than internal hardware constraints.
The Emtek Urban Modern Mod Hex Pull, 3-1/2 inch C-C, fits cabinet doors or drawers that are laid out for a two-hole pull, because its stated center-to-center dimension aligns with common cabinet drilling patterns. Its placement in the Handles and Pulls category shows it is meant as a handhold on cabinet faces, so it becomes the contact point for daily door and drawer movement. The Urban Modern Mod Hex name distinguishes it from other Emtek pull designs, which is useful when a project calls for a specific style identity across multiple cabinet banks. The satin nickel finish gives the pull a consistent, named surface color, which lets installers coordinate it with satin nickel components from the same project specification list. Referencing manufacturer part number 86459US15 on documents ties field installation back to the exact product, which helps avoid mixing different pull styles on the same run of cabinets.
The 3-1/2 inch C-C spacing gives a clear numeric target for drilling or aligning mounting holes, which helps keep rows of pulls visually straight along drawer stacks or wall cabinets. Because the part is identified as a cabinet pull within Decorative Hardware & Moldings, it is intended for visible mounting, which encourages careful alignment with door rails, stiles, or drawer fronts for an even appearance. The Emtek brand classification offers a consistent naming structure, which assists when matching this pull to other Emtek pieces during future cabinet additions or renovations. The satin nickel finish label provides a standard finish term, which supports selecting hinges or other hardware in the same finish for a coordinated installation. Using the fixed part number 86459US15 on reorder lists keeps maintenance teams tied to the same pull style and size, which simplifies long-term replacement work in commercial or multi-unit settings.
The Emtek Urban Modern Mod Hex Pull uses a 3-1/2 inch center-to-center dimension, which matches cabinets drilled for that hole spacing and supports straightforward swap-out from similar pulls.
The 3-1/2 inch C-C dimension sets the distance between mounting points, helping installers create uniform hole patterns and consistent alignment across multiple doors and drawers.
The Emtek cabinet pull 86459US15 has a satin nickel finish, which influences how it visually coordinates with other satin nickel hardware and trim in the same space.
This Emtek Urban Modern cabinet pull is classified under Handles and Pulls for Decorative Hardware and Moldings, indicating use on cabinet doors and drawers as the primary handhold.
The manufacturer part number 86459US15 uniquely identifies this Emtek Urban Modern Mod Hex Pull, which supports accurate ordering, documentation, and future replacements.
The Urban Modern Mod Hex design name indicates a hex-influenced form, which provides defined edges that give the hand a clear grip point when opening cabinets.
The Emtek Urban Modern Mod Hex Pull, 3-1/2 inch C-C, satin nickel, gives cabinet projects a clearly defined mounting dimension and finish description, which supports consistent layout and appearance across multiple openings. Its role as a cabinet pull within Decorative Hardware & Moldings means it is intended as the everyday touch point on doors and drawers, linking design and function in one component. Using the Emtek branding and part number 86459US15 ties selection, documentation, and future replacements to a single, repeatable product choice that aligns with the rest of an Emtek-based hardware schedule.