Emtek Urban Modern Mod Hex Pull gives cabinets a defined, geometric grip that works well on drawers and doors where a modern look is needed. The pull is identified as a Mod Hex style, so the form reads as clean, flat facets that line up visually across a run of cabinetry. Emtek branding ties this pull to a recognized decorative hardware line, which helps keep finishes and design language consistent across a project. The handle is designed as a cabinet pull, so it works as a primary touch point on frequently used fronts in kitchens, baths, or built-ins. Its profile supports a straightforward grasp, which matters when hands are wet or busy during daily use. The part is listed in a Handles and Pulls category, so it fits naturally into standard cabinet hardware layouts on face-frame or frameless projects.
The reference to 4 inch C-C defines the distance between mounting holes on the Emtek Urban Modern Mod Hex Pull, which is central when laying out new fronts or aligning with existing drilling. Because many cabinet lines use common center-to-center dimensions, this spacing helps the pull drop onto standard patterns in kitchens and baths. The cabinet pull classification tells installers it is built to carry repeated opening loads on doors and drawers, so it can be planned as the main operating hardware. The polished chrome finish description gives a clear cue for drill-zone protection and handling during install, as bright plated surfaces show fingerprints until wiped down after drilling and fastening work is complete.
The Emtek Urban Modern Mod Hex Pull, identified as cabinet hardware, is suited to cabinet doors and drawers where a continuous grip line is desired. Its 4 inch C-C layout works across medium-width fronts, giving enough spread for balance on typical kitchen and bath doors. The Urban Modern naming positions the pull visually with flat-panel cabinetry or simple rail-and-stile doors, so runs of hardware read consistent from piece to piece. As part of the Decorative Hardware & Moldings category, the pull belongs in visible locations where the hardware contributes to the finished look. Emtek branding connects this model to other handles and pulls from the same line, supporting projects that carry one design language through a full room or suite.
The 4 inch C-C spec on the Emtek Urban Modern Mod Hex Pull, 86460US26, provides a fixed drilling dimension, which simplifies using jigs or templates for repeat runs on doors and drawers. Because the part is clearly defined as a cabinet pull, hole placement can be standardized at ergonomic heights and offsets without adapting from knob layouts. The polished chrome finish description signals that edges and corners will visually catch light, so careful alignment across a bank of doors helps the hardware line up cleanly when viewed from across the room. The Emtek manufacturer part number and Handles and Pulls classification allow shops to reorder the exact same piece later, reducing variance when adding cabinets or replacing fronts on an existing installation.
The Emtek Urban Modern Mod Hex Pull is listed as cabinet hardware in the Handles and Pulls class, so it functions as a primary handle on cabinet doors and drawers.
The 4 inch C-C on this Emtek pull indicates a 4 inch center-to-center distance between mounting holes, which guides drilling layouts and template settings on cabinet fronts.
The polished chrome finish on the Emtek Urban Modern Mod Hex Pull creates a bright, reflective surface that visually coordinates with other polished chrome hardware in the same space.
The Emtek Urban Modern Mod Hex Pull is described as a cabinet pull, so it is typically used on cabinet doors and drawers in kitchens, baths, and built-in furniture.
The Emtek part number 86460US26 uniquely identifies this Urban Modern Mod Hex Pull, supporting consistent reordering and matching when expanding or updating installations.
The Urban Modern Mod Hex name signals a contemporary, geometric cabinet pull style, which aligns well with streamlined, modern cabinet designs.
The Emtek Urban Modern Mod Hex Pull, 4 inch C-C, polished chrome, offers a defined cabinet handle choice when a geometric, contemporary line is needed. Its Handles and Pulls classification and Emtek 86460US26 identification support consistent layout and future matching across a project. Using the 4 inch center-to-center spacing as a layout baseline, shops can plan drilling, templates, and cabinet front proportions around this pull for repeatable, aligned hardware runs.