Emtek Urban Modern Mod Hex Pull gives cabinets a defined, geometric grip that suits straightforward, modern layouts. This pull is identified as a Mod Hex Pull, so its hexagonal profile provides flat faces that line up cleanly by eye along a run of doors or drawers. As a cabinet pull, it is designed for everyday opening and closing, giving installers a simple hardware choice when matching multiple fronts across a project. The product name ties it directly to Emtek, which lets shops keep part numbers consistent when they repeat hardware on future jobs. As part of the Handles and Pulls class, it fits standard expectations for hand clearance on typical cabinet faces, helping layouts stay comfortable in kitchens, baths, and built-ins. The hex look also lets a shop coordinate with other straight-edged hardware in the same space.
The 6"CC detail means the Emtek Urban Modern Mod Hex Pull uses a 6 inch center-to-center layout, so installers can align mounting holes with cabinet layouts that follow standard pull spacing. This dimension lets a shop set up boring equipment or templates once and run through a bank of doors with consistent results. As a cabinet pull, it works with the typical thickness of cabinet fronts, so it slots into standard construction without special adaptations. The Mod Hex Pull design gives a straight run between mounting points, which helps keep the pull visually level when aligned with door rails or drawer fronts. Because the pull sits in the Handles and Pulls class, it follows normal expectations for through-bored attachment from the back of the door or drawer face.
The Web Description states "MOD HEX PULL CABINET 6' C-C US1," identifying this piece as a cabinet pull with a 6 inch center-to-center spread, so it fits rows of doors and drawers where a longer pull is preferred. The category Decorative Hardware & Moldings|Handles and Pulls places it squarely in cabinet and furniture work rather than structural hardware, aligning it with kitchens, baths, and built-ins. The satin nickel US15 finish helps it sit comfortably in projects that use similar satin nickel tones on other hardware, keeping a uniform look across a room. Because the product name calls it Urban Modern Mod Hex, it works particularly well where straight lines and simple forms are already part of the design, such as flat-panel fronts or clean-framed shaker styles.
The pull is branded as Emtek, so it fits into projects already built around Emtek cabinet hardware, letting designers and shops keep the same family of finishes and forms. Listing it under Handles and Pulls signals that it handles regular open-and-close cycles on cabinet faces, making it suitable for frequently used doors and drawers across residential or light commercial installations. The 6"CC dimension gives it enough length to span wider drawer fronts visually, so a single pull can serve as the primary handhold on medium-width drawers without crowding the panel surface.
The specific 6"CC measurement directly sets the drilling pattern for this Emtek Urban Modern Mod Hex Pull, so once that spacing is set on a template, a shop can move efficiently from part to part with uniform results. On replacement work, the same 6 inch center-to-center dimension allows this pull to match existing holes that were bored for 6"CC hardware, minimizing extra cabinet face work when swapping styles. As a Mod Hex Pull, the straight bar between the mounting centers helps keep hand contact predictable, which matters on frequently used drawers where users expect a stable grip each time.
The satin nickel US15 finish gives the pull a consistent, low-glare surface that coordinates with other satin nickel cabinet hardware described the same way, simplifying finish schedules on a project. Because the SAP Description notes "Mod Hex Pull Satin Nickel," shops can specify this finish clearly on order sheets and maintain the same look if they reorder for additional phases. Housing it in the Emtek Handles and Pulls class also means it lines up with other Emtek satin nickel cabinet pieces, supporting a unified hardware scheme across multiple rooms in the same build or remodel.
The Emtek Urban Modern Mod Hex Pull is described as a cabinet pull, so it suits standard cabinet doors and drawers in kitchens, baths, and built-ins where decorative hardware is required.
The 6"CC on this pull means the mounting holes are spaced 6 inches center to center, which guides drilling layouts and allows consistent positioning across multiple cabinet fronts.
The satin nickel US15 finish lets installers match this pull with other satin nickel cabinet hardware described the same way, supporting a coordinated appearance across a room.
The description "MOD HEX PULL CABINET" positions it for general cabinet use, so it functions on both cabinet doors and drawers where a 6 inch center spacing is desired.
The Emtek branding ties this pull to an established cabinet hardware line, helping shops repeat the same style and finish across multiple projects or additional phases.
The part number 86461US15 identifies this specific Emtek Urban Modern Mod Hex Pull in satin nickel, so it can be referenced precisely for ordering and reordering.
The Emtek Urban Modern Mod Hex Pull, 6"CC, Satin Nickel - 86461US15 brings a defined hex profile, 6 inch center-to-center spacing, and a satin nickel US15 finish together in one cabinet pull. Those verified details support clean drilling layouts, predictable alignment, and coordinated satin nickel hardware across a project. For cabinet runs built around a 6"CC pattern and a straightforward modern look, this Emtek pull offers a consistent part number that can be specified, installed, and repeated whenever matching hardware is needed.