Emtek Transitional Heritage BLYTHE Pull identifies this piece as part of Emtek's Transitional Heritage line, so it bridges traditional and contemporary cabinet styles for projects that need a clean but not ultra-modern look. The product name specifies a pull design, which gives installers a solid grip area for opening cabinet doors and drawers in kitchens, baths, and built-ins. The 4"CC detail defines a 4 inch center-to-center hole spacing, which matches layouts drilled for that common dimension and helps avoid re-drilling or patching. The Satin Nickel reference describes the finish tone, aligning this pull with other Satin Nickel components on the same job. The 86472US15 part number ties directly to this configuration, simplifying ordering, reordering, and job documentation when multiple Emtek pulls are on a project.
The 4"CC callout indicates that the pull mounts using two holes spaced 4 inches apart on center, which fits common cabinet drilling patterns for residential and commercial work. That fixed spacing helps installers rely on standard templates or boring equipment set up for 4 inch pulls, supporting consistent alignment across doors and drawers. Because this pull is defined as part of the Handles and Pulls category, it is intended for typical cabinet and furniture fronts, giving a predictable mounting plane on door and drawer faces. The Satin Nickel designation further supports use on exposed faces, where finish consistency across multiple pulls matters to both builders and clients.
The Emtek Transitional Heritage BLYTHE Pull name places it squarely in decorative cabinet hardware, so it suits cabinet doors and drawers where visible pulls define the finished look. Being in the Handles and Pulls, Emtek class means it belongs with other Emtek decorative hardware on kitchen, bath, or built-in projects that specify that brand. The 4"CC configuration aligns with layouts designed around 4 inch spacing, which is common on medium-width drawer fronts and many cabinet doors, helping maintain proportional placement on face frames or slab fronts. The Satin Nickel description ties the pull to projects that call for that finish on hinges, other pulls, or decorative trim, simplifying specification when coordinating across multiple hardware lines.
The Manufacturer Part # 86472US15 uniquely identifies this exact Satin Nickel BLYTHE pull with 4 inch center-to-center spacing, which streamlines ordering, job takeoffs, and future replacements when cabinetry is expanded or modified. The SAP description, "TRANS HERIT BLYTHE PULL, 4'CC,SN," repeats the same core information in compact form, reinforcing that this is the Transitional Heritage BLYTHE pull in Satin Nickel with 4 inch spacing, which reduces confusion when viewing internal documents or inventory lists. The Web Description, "N/D BLYTHE PULL 4' C-C US15, 86472US15," again highlights the 4 inch C-C measurement and US15 Satin Nickel finish, so project managers, installers, and purchasers are all referencing the same configuration. By matching the product name, Manufacturer Part #, and SAP description, the pull stays easy to track from specification through installation and later service work.
Emtek Transitional Heritage BLYTHE Pull, 4"CC, Satin Nickel - 86472US15 is a decorative cabinet pull used to operate doors and drawers while adding a defined Transitional Heritage style.
Emtek Transitional Heritage BLYTHE Pull, 4"CC, Satin Nickel - 86472US15 has mounting holes spaced 4 inches on center, matching cabinet fronts drilled for that common center-to-center dimension.
Emtek Transitional Heritage BLYTHE Pull, 4"CC, Satin Nickel - 86472US15 uses a Satin Nickel finish, helping it visually align with other Satin Nickel hardware specified on the same cabinets.
Emtek Transitional Heritage BLYTHE Pull, 4"CC, Satin Nickel - 86472US15 belongs to Emtek's Transitional Heritage line, fitting cabinets where designers want a blend of traditional and contemporary styling.
Emtek Transitional Heritage BLYTHE Pull, 4"CC, Satin Nickel - 86472US15 is used on cabinet doors and drawers as a handle within decorative hardware and moldings applications.
Emtek Transitional Heritage BLYTHE Pull, 4"CC, Satin Nickel - 86472US15 uses part number 86472US15, which identifies this exact pull configuration for ordering and future replacements.
The Emtek Transitional Heritage BLYTHE Pull, 4"CC, Satin Nickel - 86472US15 combines a Transitional Heritage design, a 4 inch center-to-center layout, and a Satin Nickel finish, giving installers a clearly defined option for cabinets planned around that spacing and color. When a project calls for Emtek decorative handles and pulls, this specific BLYTHE pull can be specified by its 86472US15 part number to align cabinet fronts, maintain finish consistency, and keep future reorders straightforward.