Emtek Transitional Heritage Westwood pull, 3-1/2 inch center-to-center in polished chrome, gives cabinets a defined handhold that supports consistent opening and closing on every cycle. The Emtek brand identity positions this pull within a known decorative hardware line for cabinetry work. The 3-1/2 inch center-to-center drilling dimension sets a fixed hole layout, so the pull aligns with standard cabinet boring patterns where that measurement is already present. As a pull in the Handles and Pulls category, this part provides a gripping point on doors or drawers, which helps control movement of cabinet fronts. The polished chrome finish establishes a reflective surface, so the pull reads clearly against many door and drawer finishes in a shop or installed environment. The Transitional Heritage Westwood naming places the pull visually between traditional and modern hardware families, which helps it coordinate with a range of cabinet styles in one project.
The 3-1/2 inch center-to-center measurement on the Emtek Transitional Heritage Westwood pull defines the distance between mounting holes, which guides drilling or reuse of existing borings on cabinet doors and drawers. As part of the Handles and Pulls class, this pull expects two mounting points that align on that fixed spacing, allowing consistent placement across multiple fronts in a bank of cabinets. The polished chrome finish establishes the visible face of the pull once mounted, so its appearance remains consistent wherever the same part number is used. The Emtek designation and specific SAP description tie the field part back to its catalog entry, which supports consistent layout decisions from plans through final installation.
The Emtek Transitional Heritage Westwood pull sits in the Decorative Hardware & Moldings, Handles and Pulls category, which positions it directly for cabinet doors and drawer fronts in woodworking projects. Its 3-1/2 inch center-to-center dimension aligns with layouts built around that drilling, so it suits installations where that spacing is preferred or already present. The polished chrome finish defines the surface look, allowing the same visual across all fronts using this part. Because the pull is part of an Emtek Transitional Heritage Westwood grouping, it can be used wherever that style language is desired within a project, from base cabinets to upper doors, establishing continuity across the run. The SAP description matching the center-to-center dimension provides an internal reference that supports planning for hardware positions in shop drawings.
The fixed 3-1/2 inch center-to-center spec on the Emtek 86475US26 pull supports repeatable drilling patterns, enabling jigs and boring setups to be reused across multiple cabinet fronts without adjustment. As a pull identified specifically as Transitional Heritage Westwood, it creates a known style element that can be repeated to maintain visual alignment along doors and drawers. The polished chrome finish gives a consistent reflective surface, which helps installers read spacing and straightness when lining up hardware across several cabinets. The clear manufacturer part number 86475US26 and SAP description TRANS HERIT WESTWOOD PULL, 3-1/2 CC, PC tie field use back to documentation, supporting reorders or expansions that match existing installations. Being categorized as Handles and Pulls keeps its role specific to providing a handhold on movable fronts, which simplifies hardware selection when combining it with other Emtek components in a project.
The Emtek Transitional Heritage Westwood pull has a 3-1/2 inch center-to-center dimension, which sets the drilling distance between mounting points on cabinet doors or drawers.
The Emtek 86475US26 Westwood pull uses a polished chrome finish, giving cabinets a bright metal appearance that matches polished chrome design schemes.
This product is classified under Decorative Hardware & Moldings and the Handles and Pulls class, defining it as a cabinet pull for doors or drawers.
The Transitional Heritage Westwood naming identifies this pull as part of Emtek's Westwood style group, helping coordinate it with other hardware from that family.
The 3-1/2 inch center-to-center dimension defines the hole spacing, so jigs and drilling patterns can be set to that distance for consistent cabinet hardware placement.
The identifying part number for this Emtek Transitional Heritage Westwood pull is 86475US26, which supports precise selection and repeat ordering for projects.
The Emtek Transitional Heritage Westwood pull, 3-1/2 inch center-to-center in polished chrome, offers a defined drilling dimension and a consistent finish for cabinet doors and drawers. Its placement within Decorative Hardware & Moldings and the Handles and Pulls class clarifies its role as a working cabinet pull in woodworking projects. With the manufacturer part number 86475US26 and matching SAP description, this piece supports straightforward specification when planning or extending hardware runs through Wurth Baer Supply.