Emtek Modern Rectangular Warwick Pull defines this pull as a modern, rectangular cabinet handle from Emtek, which gives installers a clear match when standardizing hardware across a project. The Warwick name identifies this specific style inside Emtek's decorative handles and pulls family, helping separate it from other modern lines when selecting a consistent look. The handle sits in the decorative hardware and moldings category, so it is intended for visible cabinet and furniture faces where appearance matters alongside function.
The pull uses a 3-1/2 inch center to center hole spacing, which lets you pair it with doors or drawers already bored on that measurement or drill new holes using a simple layout. A polished nickel finish, identified by Emtek as US14, delivers the bright, reflective nickel look many designers specify for modern and transitional jobs. The Emtek 86704US14 manufacturer part number ties directly to this exact configuration, reducing ordering mistakes when repeating hardware across multiple rooms or future phases.
The 3-1/2 inch center to center measurement on this Emtek Warwick pull gives a fixed drilling pattern, so jigs or templates can be set once and used repeatedly for doors and drawers on the same job. Because the pull belongs to the handles and pulls category, it is intended for through-bored mounting, letting the handle clamp firmly to the cabinet face. The polished nickel US14 finish means installers can stage these pulls as a final step in the hardware sequence, adding the reflective surface only after cabinet faces are ready. Using the Emtek 86704US14 identifier during layout and installation keeps paperwork aligned with the physical part, which matters when a project uses several Emtek styles at the same time.
This Emtek Modern Rectangular Warwick Pull sits in the decorative hardware and moldings group, which positions it for visible cabinet and furniture fronts in kitchens, baths, and built-ins. The 3-1/2 inch center to center spacing suits small to medium cabinet doors and drawers where a compact pull still offers comfortable gripping space. Because it is part of Emtek handles and pulls, the piece aligns visually with other Emtek hardware, making it practical when a project standardizes on that brand. The polished nickel US14 finish provides a bright surface that coordinates with polished nickel faucets or fixtures, giving designers and installers a defined match point across the room.
The modern rectangular form gives straight edges and a clean profile, which integrates well with flat-panel fronts and simple rail-and-stile doors used in many contemporary cabinet programs. With the manufacturer part number 86704US14 tied directly to this configuration, shops can list this code on cut sheets and hardware schedules, reducing the chance of mixing a different Warwick size or finish. The 3-1/2 inch center to center spec also supports retrofit situations that already have that bore spacing, allowing old pulls using the same measurement to be swapped to this modern Emtek look without altering the drilling pattern. The combination of defined size, finish code, and named style lets this pull serve as a repeatable standard across multiple rooms or future phases in the same building.
The 3-1/2 inch center to center dimension on the Warwick pull sets a precise distance between mounting holes, so shops can program drilling equipment or use templates for fast, repeatable production. As a member of the handles and pulls category, this part is built for everyday cabinet opening and closing, so the sizing and form factor are aligned with typical residential and light commercial cabinetry. The polished nickel US14 designation tells finish teams exactly which color and sheen to expect, simplifying coordination with other US14-marked components on the same job.
Working with the Emtek brand helps designers and millwork shops maintain a coherent hardware story when other Emtek products are already specified, because styles, names, and finish codes follow a consistent pattern. The Modern Rectangular Warwick description signals that this pull belongs to a straight-lined, modern-oriented family, guiding selection when the design intent calls for a minimal, rectilinear look rather than curved or traditional hardware. By anchoring ordering and installation documents around the 86704US14 part number, teams can reorder the same pull years later to extend cabinetry or replace damaged fronts while holding the original appearance and dimensions.
The Emtek Modern Rectangular Warwick Pull uses a 3-1/2 inch center to center mounting pattern, which matches doors and drawers drilled on that spacing and supports consistent hole layouts.
The Emtek 86704US14 Warwick pull is polished nickel, identified as US14, giving a bright nickel appearance that coordinates with other polished nickel hardware on the same project.
This Emtek Modern Rectangular Warwick Pull is classified under decorative hardware and moldings as a handle and pull, so it is intended for visible cabinet and furniture fronts.
The Modern Rectangular description indicates a straight, linear pull shape, which pairs well with flat-panel or simple rail-and-stile cabinet designs emphasizing clean lines.
The 86704US14 part number uniquely identifies this Warwick pull's style, size, and polished nickel US14 finish, helping purchasing teams consistently order the correct configuration.
The 3-1/2 inch center to center size allows this pull to replace other hardware using the same bore spacing, so existing hole locations can stay in place during an update.
The Emtek Modern Rectangular Warwick Pull, 3-1/2 inch center to center, polished nickel US14, offers a clearly defined size and finish that fit cabinet and furniture fronts needing a compact, modern handle. Because it sits in the decorative hardware and moldings handles and pulls group, it aligns with cabinetry work where hardware is a visible design element as well as a functional grip. Using the Emtek 86704US14 part number connects design, purchasing, and installation to the same specific pull, supporting repeat orders and matching future work to existing installations.