Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Emtek Modern Rectangular Keaton Finger Pull sets up a clean, modern grip point on cabinet fronts, using its finger-pull design to open doors and drawers without a projecting handle, which keeps lines tight on contemporary work.
This Emtek finger pull belongs to the Handles and Pulls class, so it functions as a primary operating pull on cabinet faces, giving installers a dedicated touch point instead of relying on edge-grabbing that can mark finishes.
The rectangular Keaton profile defines a straight, modern aesthetic, which helps tie together flat-panel fronts where consistent geometry matters on a bank of cabinets.
The pull is identified as the Emtek Modern Rectangular Keaton Finger Pull, 1-1/2"CC, Satin Brass - 86713US4, so its center-to-center measurement and finish are fixed, giving you a repeatable spec across all fronts in a run.
Satin Brass, designated by US4 in the part number 86713US4, provides a brass tone with a satin sheen, which visually softens reflections on cabinet faces and supports warm metal accents in a run of decorative hardware.
The product sits in Wurth Baer Supply's Decorative Hardware & Moldings|Handles and Pulls category, placing it alongside other cabinet operating hardware, which helps keep hardware schedules consistent on professional woodworking projects.
The 1-1/2"CC spec on the Emtek Modern Rectangular Keaton Finger Pull defines the distance between mounting points, which means drill locations can be laid out from cabinet edges using a fixed offset for repeatable installation.
Because this part is listed under Handles and Pulls, it is intended to be mounted on cabinet doors or drawers as the primary operating pull, supporting a consistent hand position on each front.
The rectangular form of the Keaton finger pull sets a clear orientation on the cabinet face, which helps align pulls along a shared axis on wide drawer banks or tall door runs.
The satin brass US4 finish on 86713US4 establishes the visible metal tone at the mounting area, so you can position the pull to highlight the warm brass look against light or dark cabinet finishes.
The Emtek Modern Rectangular Keaton Finger Pull, 1-1/2"CC, Satin Brass - 86713US4, fits projects calling for a compact pull, because the 1-1/2" center-to-center measurement suits smaller drawer fronts or tight door rails where space between edges is limited.
Its role within Decorative Hardware & Moldings|Handles and Pulls places it on cabinet faces in kitchens, baths, or built-ins, creating a defined grip point that supports frequent use on working storage.
The modern rectangular Keaton styling aligns with straight-lined cabinetry, so it stays visually consistent on slab or simple recessed-panel doors where a minimal pull supports the overall design intent.
The satin brass US4 finish makes this finger pull suitable where a brass tone is part of the design palette, letting installers coordinate it with other satin brass cabinet hardware to maintain a unified appearance across a room.
The Emtek branding and Keaton name let you specify the pull by style as well as by part number 86713US4, helping maintain design continuity when you repeat the same pull across multiple rooms or phases of a project.
The 1-1/2"CC measurement on the Emtek Keaton finger pull provides a fixed drilling pattern, which helps installers use jigs or templates to speed layout and hold consistent spacing on rows of cabinet fronts.
Being a finger pull in the Handles and Pulls class, this part is sized for fingertip operation, so it functions well on smaller fronts where a full-size handle might crowd panel edges.
The modern rectangular form of the Keaton profile sets up straight reference lines against door and drawer edges, giving a visual check for square alignment when you fasten the pull to the cabinet face.
The satin brass US4 finish on 86713US4 defines the sheen and color, which matters when aligning multiple pulls under the same lighting, because the uniform finish helps the entire hardware run read as one planned element.
The full product identification, Emtek Modern Rectangular Keaton Finger Pull, 1-1/2"CC, Satin Brass - 86713US4, provides a precise spec for drawings and material lists, so project documentation can clearly call out the exact pull used in a hardware schedule.
Placement of this finger pull within Wurth Baer Supply's Decorative Hardware & Moldings|Handles and Pulls category ties it into a broader hardware set, which supports using it as part of a coordinated Emtek solution from the same supplier.
The Emtek Modern Rectangular Keaton Finger Pull 86713US4 has a 1-1/2" center-to-center measurement, which sets the distance between mounting points for cabinet drilling.
The Emtek Keaton finger pull 86713US4 uses a satin brass finish designated as US4, which gives cabinets a warm brass tone with a satin sheen.
The Emtek Modern Rectangular Keaton Finger Pull is categorized under Decorative Hardware & Moldings|Handles and Pulls, so it is applied to cabinet doors and drawers as an operating pull.
The modern rectangular Keaton design creates straight visual lines on the cabinet face, helping align pulls consistently along edges or across drawer banks.
The Emtek part number 86713US4 identifies the Modern Rectangular Keaton Finger Pull in satin brass US4 with a 1-1/2" center-to-center drilling dimension.
The 1-1/2" CC size on this Emtek finger pull lets installers standardize drilling patterns, which supports repeatable hardware placement across multiple cabinet fronts.
The Emtek Modern Rectangular Keaton Finger Pull, 1-1/2"CC, Satin Brass - 86713US4, combines a compact center-to-center size with a modern rectangular form, giving cabinet projects a defined grip point that aligns cleanly with contemporary fronts.
The satin brass US4 finish and precise 1-1/2"CC specification let you plan hole locations and visual coordination in advance on drawings and hardware schedules.
For work calling for a modern Emtek finger pull drawn from the Decorative Hardware & Moldings|Handles and Pulls category, this Keaton model provides a clear, repeatable choice for doors and drawers.