Emtek modern glass bar pull gives cabinets a modern glass bar grip anchored by metal ends, so doors and drawers gain a defined handhold that supports consistent opening and closing in daily use. This Emtek modern glass bar pull combines glass with metal ends, which creates a mixed-material look that separates the clear grip from the warm metal supports for a clean transition between cabinet face and hand contact. The Emtek Modern Glass Bar Pull, 4"CC, Glass/Unlacquered Brass - 86724US3NL uses unlacquered brass on the metal portions, so the brass finish presents as bare metal that contributes a traditional brass tone alongside the glass element. The 4"CC reference in the Emtek description indicates a 4 inch center-to-center hole spacing, which allows installers to line up drill points or reuse existing 4 inch center-to-center bores on cabinet faces without changing standard layout. The product sits in the handles and pulls class, so it serves as a primary operating pull on doors or drawer fronts where a linear grip is preferred.
The 4"CC dimension in the Emtek Modern Glass Bar Pull, 4"CC, Glass/Unlacquered Brass - 86724US3NL ties the pull to a 4 inch center-to-center mounting span, so installers can design layouts or replacements around that fixed distance between attachment points. This 4 inch center-to-center spacing lets cabinet faces share a repeated hole pattern, which simplifies templating and speeds layout when multiple doors or drawers are being fitted in sequence. Because the pull sits in the Emtek handles and pulls class, it mounts where a standard pull would normally be placed, allowing it to occupy the same footprint as other 4 inch center-to-center pulls on comparable cabinetry.
The Emtek Modern Glass Bar Pull, 4"CC, Glass/Unlacquered Brass - 86724US3NL is part of the handles and pulls class, so it is suited to cabinet doors and drawers where a linear bar pull is desired. The 4"CC reference aligns the pull with 4 inch center-to-center drilling, letting installers position it on face frames, slab fronts, or panel doors that accept this standard span. Because the web description identifies it as a crystal bar pull with 4" C-C, the grip portion functions as a clear bar element, which places a glass bar visually across the cabinet face. The unlacquered brass detail in the Glass/Unlacquered Brass description defines the metal tone at each end, so the pull contributes both transparent glass and brass-colored metal in every installed location.
The Emtek modern glass bar pull format creates a straight bar between two metal ends, so installers can align the bar horizontally or vertically to follow sightlines across a cabinet run. The 4 inch center-to-center measure in the Emtek Modern Glass Bar Pull, 4"CC, Glass/Unlacquered Brass - 86724US3NL standardizes the distance between mounting points, which helps maintain equal offsets from door edges and drawer sides across an entire bank of cabinets. Its classification under Emtek handles and pulls keeps the product in line with other Emtek decorative hardware, so projects that rely on that brand can repeat this style wherever a 4 inch center-to-center pull is specified. The crystal bar aspect described in the web description directs the grip to a clear bar form, which stands out against painted or stained wood fronts and assists with visually checking alignment from cabinet to cabinet.
The Emtek Modern Glass Bar Pull, 4"CC, Glass/Unlacquered Brass - 86724US3NL is a handle and pull, so it serves as an operating bar pull on cabinet doors or drawers.
The 4"CC designation indicates 4 inch center-to-center spacing between mounting points, so hole drilling or replacement layouts follow that 4 inch span on the cabinet face.
The Emtek Modern Glass Bar Pull, 4"CC, Glass/Unlacquered Brass - 86724US3NL combines a glass bar section with unlacquered brass metal portions, so each installed pull shows both clear glass and brass tone.
The Emtek modern glass bar pull uses a straight bar between two metal ends, so installers can align it horizontally on drawers or vertically on doors to match project layout.
The product is from Emtek and is listed in the handles and pulls class, so it coordinates with other Emtek decorative cabinet hardware selections on a job.
The Glass/Unlacquered Brass description identifies unlacquered brass on the metal areas, so the pull presents a brass-colored tone framing the glass bar on cabinet fronts.
The Emtek Modern Glass Bar Pull, 4"CC, Glass/Unlacquered Brass - 86724US3NL pairs a glass bar grip with unlacquered brass ends, giving cabinets a defined handhold and a mixed glass-and-brass look. Its 4 inch center-to-center mounting span supports consistent drilling and straightforward replacement where that spacing already exists. As part of the Emtek handles and pulls class, it functions as a primary operating pull on doors and drawers, letting projects maintain a unified decorative hardware direction across multiple cabinet locations.