Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Docking Drawer 20 amp safety interlock kit is a safety interlock disconnect kit with magnetic switch that cuts power to appliance garage outlets when the switch aligns with the magnet. This configuration uses a normally closed magnetic switch, so power automatically turns off only when the door-mounted switch meets the cabinet-mounted magnet, helping keep heat-generating appliances off in closed cabinet spaces. The kit provides (2) 20 amp AC outlets to power up to 4 appliances inside kitchen or bath cabinets, so multiple devices can be ready at a single location while protected by the same safety interlock. The system is ETL listed, complies with NEC and CEC standards, and is certified for UL 498 and CSA 22.2 #42, so it is approved for use in the US and Canada on projects that require recognized safety certifications.
This Docking Drawer safety interlock disconnect kit is designed to fit a standard triple-gang wall box, so it aligns with common electrician rough-in practices for appliance garages and similar cabinet installations. Because the kit mounts neatly behind cabinet doors, the functional components sit within the cabinet structure while leaving the primary storage and appliance area free for layout decisions. The normally closed magnetic switch is triggered when the switch aligns with the magnet, so installers can position the magnet and switch so that power turns off when doors reach the fully closed position, allowing the wiring layout and door hardware to work together in a predictable pattern.
This Docking Drawer 20 amp safety interlock kit is intended for appliance garages and similar cabinet spaces where heat-generating appliances are stored behind doors. By providing (2) 20 amp AC outlets capable of powering up to 4 appliances, the kit centralizes power inside the cabinet so devices such as small kitchen or bath appliances can remain plugged in while the safety interlock manages power status. The mounting behind cabinet doors keeps the electrical components against the cabinet structure while leaving room for appliance placement. In kitchen and bath cabinet layouts using in-drawer or in-cabinet outlets, this configuration supports controlled power for storage zones that need automatic shutoff when doors are closed.
The non-contact magnetic switch at the heart of this safety interlock disconnect kit controls power whenever it aligns with the magnet, so there is no direct mechanical plunger that must travel, which supports consistent operation over many cycles as doors open and close. Because the switch is normally closed, power flows during typical door-open use and shuts off automatically when the magnet comes into alignment at the door-closed position, which ties power behavior directly to door movement without extra steps. This enhanced safety function helps keep heat-generating appliances off in closed cabinet spaces, so cabinets are not acting as powered enclosures when doors are shut during normal routines. The ETL listing, along with compliance with NEC and CEC standards and certification for UL 498 and CSA 22.2 #42, shows that the product has been evaluated against recognized electrical and safety standards used in the US and Canada, which supports its use in projects that rely on listed in-drawer or in-cabinet outlet solutions.
The Docking Drawer safety interlock disconnect kit uses a normally closed magnetic switch to cut power automatically when the switch aligns with the magnet, so appliances shut off when cabinet doors reach the closed position.
The Docking Drawer magnetic switch is triggered by alignment with a magnet rather than physical contact, so power changes state whenever the cabinet door position brings the two components into alignment.
The Docking Drawer kit provides (2) 20 amp AC outlets that can power up to 4 appliances, allowing multiple heat-generating devices to operate from a single cabinet-based safety interlock system.
The Docking Drawer safety interlock kit fits a standard triple-gang wall box and mounts neatly behind cabinet doors, keeping the electrical components against the cabinet structure while appliances occupy the interior space.
The Docking Drawer normally closed configuration means power is available during typical use and shuts off only when the magnetic switch aligns at the closed-door position, providing predictable behavior tied to cabinet movement.
The Docking Drawer safety interlock kit is ETL listed, complies with NEC and CEC standards, and is certified for UL 498 and CSA 22.2 #42, so it is approved for use in the US and Canada.
The Docking Drawer 20 amp safety interlock disconnect kit with magnetic switch offers a way to power up to 4 appliances inside an appliance garage while automatically turning power off when the switch aligns with the magnet. Its fit to a standard triple-gang wall box and mounting position behind cabinet doors support straightforward integration into kitchen or bath cabinet projects that call for controlled power inside closed spaces. ETL listing, NEC and CEC compliance, and certification for UL 498 and CSA 22.2 #42 position this kit as a listed solution for in-cabinet power where automatic shutoff for heat-generating appliances is required by the design.
Sold In: 1 Kit
