36W 12V power supply delivers 36 watts at 12 volts to drive PRO LED lights, providing a matched low-voltage source that keeps the lighting system running within its designed load range for consistent performance in shop, cabinet, or display installs. The Pro Value Series branding identifies this unit as part of a dedicated lighting drivers line, so it ties into a predictable setup when you standardize components across multiple projects. Manufacturer part SZL-PSPLG-12V36W gives you a precise reference that matches this 36W 12V power supply in ordering systems, which helps prevent mix-ups when you repeat jobs or stock parts for crews. The SAP description 36W 12V POWER SUPPLY W/6 PORTS confirms both output and port count in one line, simplifying how you specify this driver on drawings and material lists.
The 12 volts rating on this Pro Value Series driver means it feeds low-voltage power appropriate for PRO LED lights, so your wiring layout centers on a stable 12V source rather than mixed voltages. Its 36 watts capacity sets a clear upper limit for the total wattage of attached fixtures, which helps you calculate how many PRO LED lights to connect on a given run without overloading the driver. The 6-ports configuration groups multiple light connections at the power supply, simplifying how you fan out to separate sections such as upper cabinets, toe-kicks, or display niches while still tracing each circuit back to one labeled driver.
This Pro Value Series 36W 12V power supply is identified in the Web Description as used to power PRO LED lights, positioning it as the dedicated driver for that lighting family in woodworking and casework settings. The Lighting Drivers category placement ties this product directly to lighting control and power delivery, so it naturally sits at the heart of undercabinet, shelving, or display light layouts built around PRO LED lights. With 36 watts available at 12 volts, this power supply supports small to medium LED runs that are common in individual kitchen zones, single office workstations, or shorter display bays where large industrial drivers are not necessary. The 6-ports design lets you treat this unit as a hub for several light segments, which is useful when you want one driver mounted near a cabinet run while feeding separate compartments or sections. Brand identification as Pro Value Series means you are working with a defined driver line, which helps maintain consistency across multiple jobs when you repeat the same lighting spec.
The explicit 36 watts rating on this 12V driver provides a clear planning number, so you can total the watt consumption of PRO LED lights on a drawing and match circuits logically to this power supply. Because the SAP description calls out 36W 12V POWER SUPPLY W/6 PORTS, every reference in takeoffs and job notes points to a single, specific unit, reducing confusion when multiple drivers are present on a project. The manufacturer part number SZL-PSPLG-12V36W creates a consistent identifier from design through ordering, which supports repeatable results when teams reorder the same driver for future phases or service. UL listed status adds a documented safety listing to the driver, which matters when projects call for listed components and when you want a power supply that aligns with common commercial and residential requirements. Taken together, the 12 volts output, 36 watts capacity, and 6-ports layout give you a predictable power node for PRO LED lights, helping you design lighting runs that are straightforward to replicate across similar installations.
The 36W 12V power supply is described as used to power PRO LED lights, so it serves as the driver specifically intended to run that PRO LED lighting line at 12 volts.
The 36 watt output defines how much total PRO LED light wattage you can run from this driver, guiding how many fixtures or segments you plan on a single power supply.
The 12 volt rating matches low-voltage PRO LED lights, so the driver delivers the voltage those fixtures are designed for, supporting consistent brightness along the connected run.
The 6-ports configuration gives you six connection points for PRO LED lights, allowing multiple lighting segments to be powered from one driver location on the project.
The UL listed note indicates this 36W 12V power supply has a recognized safety listing, which is useful when projects specify components that meet UL standards.
The manufacturer part SZL-PSPLG-12V36W and SAP description 36W 12V POWER SUPPLY W/6 PORTS uniquely identify this 36 watt, 12 volt, 6-port Pro Value Series power supply.
The Pro Value Series 36 watts, 12 volts power supply with 6-ports pairs directly with PRO LED lights, giving you a clearly rated low-voltage driver for focused cabinet, shelving, or display projects. Its 36W 12V POWER SUPPLY W/6 PORTS designation and UL listed status provide straightforward specs you can drop into drawings, quotes, and reorders. When a job calls for a defined 12V driver for PRO LED lights, this SZL-PSPLG-12V36W unit offers a specific, documented option for your layout.
Sold In: 1 Each