Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Traditional Advantage Four pull is a zinc die cast cabinet handle in a Weathered Nickel finish, so it gives cabinet fronts a traditional look using a durable metal base. The pull has a 3 inch (76 mm) center to center dimension, which sets the mounting hole spacing for new installs or replacements. Its overall 5-1/4 inch length provides hand clearance across standard drawer fronts, helping users get a solid grip in daily use. A 1 inch projection sets how far the pull stands off the cabinet face, which affects both ergonomics and the space needed in tight clearances. The 1/2 inch width shapes the feel of the handle in the hand, important on frequently used doors. A base diameter of 5/8 inch frames the contact area against the cabinet surface, which helps visually cover typical bore marks on many cabinet styles.
The 3 inch (76 mm) center to center dimension on this Berenson Traditional Advantage Four pull is the critical layout reference, because it dictates where to drill through the cabinet or drawer front. The 5-1/4 inch overall length then determines how much of the front the pull spans, affecting placement relative to panel edges and rails. With a 1 inch projection, installers know how far the handle will sit off the face, which can factor into clearances near appliance doors or intersecting drawers. The 1/2 inch width and 5/8 inch base diameter define the footprint against the front, so installers can anticipate coverage of existing marks when swapping from a pull with similar proportions.
This Berenson Traditional Advantage Four pull belongs to the Advantage Plus collection, which ties it to a coordinated decorative hardware family for projects needing consistent styling. The Weathered Nickel finish and traditional profile suit cabinet work where a muted, aged nickel tone is preferred over brighter metal finishes. With a 3 inch (76 mm) center to center size, the pull aligns with a common hole spacing used on many residential drawers and doors, which benefits replacements that match this dimension. The 5-1/4 inch length works on standard cabinet widths, so one pull can serve both doors and smaller drawers in a bank without overpowering the fronts.
The defined 3 inch center to center mounting measurement lets installers or fabricators reset jigs for repetitive drilling, which speeds production runs across multiple fronts. A known 1 inch projection helps plan for handle clearance on adjacent cabinets, reducing the chance of handles clashing when doors swing open. The 1/2 inch width and 5/8 inch base diameter give predictable bearing surfaces against the face, so spacing from panel edges can be set for a consistent reveal line from door to door. Using the specified 5-1/4 inch overall length as a reference, tradespeople can center the pull on rails or drawer fronts in a repeatable way, which keeps lines straight across an entire kitchen or built-in installation.
The Berenson Traditional Advantage Four pull has a 3 inch (76 mm) center to center measurement, which sets the spacing between mounting holes for drilling or matching existing cabinet layouts.
The Berenson 9354-10WN-P pull has a 5-1/4 inch overall length, so it spans a useful portion of most drawer fronts and doors while staying within typical cabinet proportions.
The Advantage Plus pull is made from zinc die cast, providing a solid metal construction that suits everyday cabinet and drawer use in residential or shop environments.
This cabinet pull has a Weathered Nickel finish, giving it a softened nickel appearance that coordinates with other nickel hardware while offering a traditional visual style.
The pull projects 1 inch from the cabinet face, setting how much finger clearance there is behind the handle and helping plan for nearby cabinet or wall clearances.
This pull has a 1/2 inch width and a 5/8 inch base diameter, defining its contact area on the cabinet and the visual footprint around each mounting point.
The Berenson Traditional Advantage Four pull in Weathered Nickel brings a zinc die cast construction, a 3 inch (76 mm) center to center layout, and a 5-1/4 inch length that suits many cabinet doors and drawers. Its 1 inch projection, 1/2 inch width, and 5/8 inch base diameter give predictable proportions for layout work, from new builds to replacements using the same hole spacing. For projects calling for a Weathered Nickel cabinet handle with this exact 3 inch configuration, this pull aligns dimensions and appearance in a straightforward option.
Sold In: 1 Each
