Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amana 3/8 x 2-9/16 countersink bit gives you a high performance way to form a countersink that matches a #6 screw head using a single dedicated tool. The Amana Tool design places a 3/8 inch countersink profile ahead of the cutting edge length, so the bit forms a consistent recess sized for #6 screws while drilling to a depth that suits the job. The carbide tipped construction focuses wear resistance at the cutting edges, which matters when repetitive drilling would quickly dull standard tool steel. The AlTiN coated surface manages friction at the cutting area, supporting steady cutting when material or extended use would otherwise raise heat at the tip. With its overall 2-9/16 inch length, the bit reaches a practical working depth for typical woodworking and assembly tasks where countersunk #6 screws are used.
This high performance AlTiN coated carbide tipped countersink bit uses its 3/8 inch cutting profile to shape the recess that receives a #6 screw head, so the screw seats into a matched cone rather than bearing on a rough drill edge. The 2-9/16 inch bit length defines how far the tool extends from the chuck, which affects how you stage drilling depth relative to material thickness on cabinet components or similar parts. With the Amana Tool construction focused on countersinking, the bit is set up to produce a finished recess in one pass, which helps keep screw locations uniform from part to part. The combination of carbide tipping and coating supports repeatable cutting performance across runs where the same #6 screw pattern is used.
This Amana Tool countersink bit sits in the countersinks class within bits, blades and cutters, so it fills the role of preparing screw locations before driving fasteners. The 3/8 inch countersink diameter is tailored to #6 screws, which aligns to fastening situations where that screw size is standard across a run of parts, such as consistent hardware or bracket mounting that calls for a flush or slightly recessed screw head. With its 2-9/16 inch length, the bit fits well into drilling setups where you balance reach into workpieces with control at the drill or driver, such as bench drilling stations or handheld drivers working along cabinet edges and case panels. The carbide tipped structure and AlTiN coating position this tool as a choice for repetitive countersinking when uniform #6 screw seating is important to the finished assembly.
The defined 3/8 inch x 2-9/16 inch format gives you fixed geometry, so once drilling depth is established for a #6 screw, the bit continues to create the same countersink profile across all fastener locations. The carbide tipped cutting edges hold their shape at the working contact, which supports cleaner, more consistent recess walls so the screw head bears evenly as torque is applied. AlTiN coating on the bit adds a functional surface layer at the cutting zone, which helps manage friction where the bit meets the material and supports stable behavior during extended use. As a dedicated countersink within the bits, blades and cutters group, this tool concentrates on forming the precise screw head recess rather than general drilling, which can streamline layouts whenever a #6 screw pattern repeats through a project or production run.
This Amana Tool high performance countersink bit is described for a #6 screw, so its 3/8 inch countersink geometry is matched to seating the head of that screw size in the workpiece.
The Amana Tool 55202XL countersink bit is identified as 3/8 inch x 2-9/16 inch, giving you a 3/8 inch countersink diameter and an overall length of 2-9/16 inches for setup planning.
The carbide tipped construction places harder material at the cutting edges, which supports edge retention and helps the bit maintain a consistent countersink profile over repeated #6 screw locations.
The AlTiN coated description indicates a coating on the countersink bit, which manages surface interaction at the cutting zone and supports performance where tool tip heat can build during repeated drilling.
This product is listed under bits, blades and cutters in the countersinks class, so it is intended specifically for forming countersunk recesses rather than general drilling work.
This 3/8 inch x 2-9/16 inch high performance AlTiN coated carbide tipped countersink bit for #6 screws is manufactured by Amana Tool, a brand identified in the product data.
The Amana 3/8 inch x 2-9/16 inch high performance AlTiN coated carbide tipped countersink bit, described for #6 screws, gives you a defined countersink tool within the countersinks class. For projects or production runs built around #6 fasteners, this Amana Tool bit provides a matched 3/8 inch recess profile and a fixed working length that supports consistent screw seating from one workpiece to the next.
Sold In: 1 Each