Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Knoxville door pull is crafted for glass shower doors, so it is built around wet-area use where a solid grip matters every day. This pull is an 8-inch Center to Center back-to-back door pull, which spaces the grips for a comfortable hand position and a consistent look on both sides of the glass. The back-to-back configuration means you have a gripping point inside and outside the shower, helping doors move smoothly in both directions. The pull is finished in Oil Rubbed Bronze, giving a dark, traditional tone that coordinates with many bathroom fixtures. That finish helps the handle visually tie together hinges, valves, and other bronze trim on the job. As part of Emtek decorative hardware and moldings, this handle stays within a known family of bath hardware, helping projects maintain a coherent design line across different components.
The Emtek Knoxville door pull fits glass door thickness between 1/4 inch and 1/2 inch only, which targets common shower glass sizes and supports a snug, controlled clamping range. By matching this thickness window, the handle can clamp properly without over-stressing the glass, which is important on tempered panels that work in this dimension band. The 8-inch Center to Center mounting pattern brings consistency when aligning with pre-drilled holes made for this spread, allowing installers to coordinate drilling jigs and layouts around a known dimension. Together, the thickness range and fixed center-to-center spacing guide hole placement decisions on new installations and help evaluate alignment on existing doors drilled for an 8-inch pattern.
The Emtek Knoxville door pull is crafted for glass shower doors, so it works in applications where a through-glass handle is needed on both sides of a tempered panel. The 8-inch Center to Center dimension means it suits layouts designed around a mid-length pull, often used on standard-height residential shower doors where full-length ladder pulls are not required. Its fit on glass door thickness between 1/4 inch and 1/2 inch only lines up with many shower enclosures, from lighter framed units at the low end of this range to heavier semi-frameless panels closer to 1/2 inch. On projects that standardize around Oil Rubbed Bronze, the finish on this pull helps tie it into the overall shower hardware package, creating a visual line from hinges to pulls.
This 8-inch Center to Center back-to-back door pull offers a balanced gripping span, which supports controlled pull force when opening and closing doors, especially when hands are wet. The back-to-back design places a Knoxville grip on each side of the glass, giving users a familiar feel from either direction and helping doors close consistently against seals or jambs. Because the pull fits glass door thickness between 1/4 inch and 1/2 inch only, the clamping force stays within a predictable range on panels drilled for the 8-inch spread, which matters for repeatable installs across multiple units in the same project. In combination with the Oil Rubbed Bronze finish, these dimensional details allow the handle to perform a functional role while reinforcing the chosen design theme through everyday operation.
The Emtek Knoxville door pull is crafted for glass shower doors, so it is aimed at through-glass shower installations rather than wood or metal door panels.
The Emtek Knoxville door pull fits glass door thickness between 1/4 inch and 1/2 inch only, which covers common shower enclosure glass sizes used in many installations.
The Emtek Knoxville door pull has an 8-inch Center to Center dimension, giving an 8-inch spread between mounting points for drilling and layout.
The Emtek Knoxville door pull is a back-to-back door pull, so it places a pull on each side of the glass panel for two-sided operation.
The Emtek Knoxville door pull, part number GBTB86077US10B, is finished in Oil Rubbed Bronze, matching projects that use bronze-toned bath hardware.
The Knoxville door pull belongs to Emtek decorative hardware and moldings in handles and pulls, aligning it with other Emtek design families for coordinated projects.
The Emtek Knoxville door pull brings an 8-inch Center to Center back-to-back layout to glass shower doors, pairing a familiar hand span with two-sided access. Its fit on glass door thickness between 1/4 inch and 1/2 inch only gives a defined target range that matches typical shower glass. The Oil Rubbed Bronze finish supports projects built around darker metal tones, keeping this pull visually consistent with other Emtek elements in the space. For jobs that call for a mid-length glass shower handle with a coordinated finish, this Emtek Knoxville door pull offers a clear, well-defined option.