Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Knoxville door pull is a glass shower door pull designed as a back to back set, so it provides gripping points on both sides of the glass for controlled door movement in daily use. The pull is specified as 8 inch Center to Center, which spaces the mounting points for a comfortable hand position and consistent alignment with other 8 inch hardware on the project. It is made by Emtek, so it matches the Knoxville design family when coordinating hardware across the bathroom. The pull is finished in Pewter, which delivers a muted metallic tone that works with many trim finishes without overpowering a shower layout. This model is identified as GBTB86077US15A, giving installers an exact part reference when repeating a job detail or matching an existing Knoxville installation.
The Knoxville door pull fits glass door thickness between 1/4 inch and 1/2 inch only, so it targets common residential shower glass sizes and keeps the clamping engagement within the hardware design range. The pull uses a grip with #10-32 threads in the stem on one side and a mating grip with a 3/8 inch diameter hole in the stem on the other, so the stems work together as a connected pair through the glass. Two 3/8 inch diameter bevel head screws with #10-32 threads by 3/4 inch long and two 3/8 inch diameter bevel head screws with #10-32 threads by 7/8 inch long engage those stems, giving length options that correspond to the specified 1/4 inch to 1/2 inch glass range.
The Emtek glass shower door back to back pull layout lets this Knoxville model serve on swing-type glass shower doors where users expect a substantial handhold. Its 8 inch Center to Center measurement places the hand grip at a practical length for both tall and shorter users, supporting a steady pull on heavier glass panels. The specified fit for 1/4 inch to 1/2 inch thick glass lines it up with many frameless or semi-frameless shower systems that use glass in that range, allowing the hardware to sit properly without over-compressing the glass. The Pewter finish provides a neutral metallic tone that works with brushed or satin plumbing trims, so the pull can visually coordinate within a mixed-vendor bathroom build. By matching the Knoxville name, the pull can align stylistically with other Emtek pieces used on nearby doors or cabinetry.
The grip with #10-32 threads in the stem is designed to accept bevel head screws with matching #10-32 threads, which guides installers toward a consistent fastening method through the glass. The mating grip with a 3/8 inch diameter hole in the stem receives the opposing screw end, so the pair of grips draws together evenly when tightened. Having both 3/4 inch and 7/8 inch long bevel head screws, each with 3/8 inch diameter heads and #10-32 threads, gives flexibility to match screw length to actual glass thickness within the 1/4 inch to 1/2 inch specification, which helps control how much threaded engagement sits in each stem. A set of gaskets is provided for the assembly, so the pull interface can be cushioned between metal and glass to support a more controlled bearing surface at the mounting points. Together, these details back up a repeatable installation process on properly sized shower glass where the Knoxville pull is specified.
The Emtek Knoxville door pull is crafted for glass shower doors, so it is suited to wet-area glass door applications rather than wood or metal cabinet fronts.
The Knoxville pull's 8 inch Center to Center dimension sets the distance between mounting points, guiding hole layout and aligning it with other 8 inch hardware on the project.
The Knoxville door pull fits glass door thickness between 1/4 inch and 1/2 inch only, so it is intended for shower glass sized within that range.
The Knoxville pull uses a grip with #10-32 threaded stem, a mating grip with a 3/8 inch diameter hole, and bevel head screws that draw the two grips together through the glass.
This Emtek pull is finished in Pewter, giving the shower door a muted metallic look that coordinates with many bathroom trim finishes.
The Knoxville pull provides 3/4 inch and 7/8 inch long bevel head screws so installers can match screw length to actual glass thickness within the 1/4 inch to 1/2 inch range.
The Emtek Knoxville door pull brings an 8 inch Center to Center back to back layout specifically crafted for glass shower doors, so it fits projects needing a substantial through-glass grip. Its fit for 1/4 inch to 1/2 inch glass, threaded stem design, and Pewter finish provide clear parameters for planning hole locations, coordinating finishes, and repeating the same hardware choice across multiple bathrooms when the GBTB86077US15A part number is specified.