Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Knoxville door pull is a glass shower door pull designed as a back to back set, so it provides a secure grip from both sides of the glass panel. This pull uses an 8 inch Center to Center length, which spaces the mounting points for a comfortable hand placement and a balanced look on shower doors. The pull is finished in Polished Chrome, giving a bright surface that visually matches many modern bathroom faucets and trim for a consistent appearance. As a glass shower door back to back pull, it mounts through the glass and ties the two grips together, which helps distribute handling forces and supports repeatable daily use on hinged or sliding shower doors.
This Emtek Knoxville door pull fits glass door thickness between 1/4 inch and 1/2 inch only, so it is sized for common shower glass panels used in residential and light commercial bathrooms. That thickness range guides where the pull can be used, keeping the stems and threaded connections in their intended working span. The pull uses a back to back layout on the glass, which means each grip attaches through the glass panel, so the assembly clamps onto the glass and holds the pulls in a fixed relationship. The grip with #10-32 threads in the stem interfaces with the bevel head screws, creating a threaded connection that draws the two sides together on the glass thickness the pull is designed to fit.
The Emtek Knoxville door pull is crafted for glass shower doors, so it is intended for installations where the door panel is made from glass within the 1/4 inch to 1/2 inch thickness range. The 8 inch Center to Center length suits typical shower door widths, allowing the pull to sit comfortably at a user-friendly height while still leaving clear glass around it. As a decorative handle and pull, it functions both as a gripping point and as a visible design feature, contributing to the overall appearance of the shower enclosure. The polished chrome finish ties into polished chrome fittings, making it a practical choice when the rest of the bathroom trim follows the same finish family. Because it is a back to back glass shower door pull, it establishes a continuous grip from inside and outside the shower, supporting consistent door handling from either side of the panel.
This Emtek glass shower door back to back pull uses one grip with #10-32 threads in the stem and one mating grip with a 3/8 inch diameter hole in the stem, so the two sides work together as a matched set across the glass. Two 3/8 inch diameter bevel head screws with #10-32 threads by 3/4 inch long and two 3/8 inch diameter bevel head screws with #10-32 threads by 7/8 inch long are specified, which provides threaded engagement options that correspond to the 1/4 inch to 1/2 inch glass thickness range. These specific screw dimensions allow the installer to use lengths appropriate to the actual glass thickness while still engaging the threaded stem, supporting a secure connection. A set of gaskets is specified, which places a buffer between metal components and the glass surface, supporting even load transfer against the panel. Together, the stems, threaded screws, and gaskets create a clamping arrangement that holds the pull aligned on the glass, which supports smooth, repeatable opening and closing of the shower door over time when used within the stated glass thickness range.
The Emtek Knoxville door pull is crafted for glass shower doors, so it is intended for use on glass shower panels within its specified thickness range.
The Emtek Knoxville door pull fits glass door thickness between 1/4 inch and 1/2 inch only, so it aligns with common shower glass sizes in that range.
The Emtek Knoxville door pull uses an 8 inch Center to Center dimension, so the mounting holes on the glass are spaced 8 inches apart for this handle.
The Emtek GBTB86077US26 Knoxville door pull is finished in Polished Chrome, so it visually coordinates with other polished chrome bathroom hardware.
The Emtek Knoxville door pull uses one threaded stem grip and one mating grip joined through the glass, so the assembly clamps onto the panel for a secure hold.
The specified 3/4 inch and 7/8 inch bevel head screws with #10-32 threads correspond to the 1/4 inch to 1/2 inch glass range, supporting effective clamping on varying thicknesses.
The Emtek Knoxville door pull, glass shower door back to back, 8 inch Center to Center in Polished Chrome, provides a defined fit for glass thickness between 1/4 inch and 1/2 inch. That combination of specified glass range, back to back layout, and polished chrome finish helps align the pull with planned shower door glass panels and trim selections. Using the Emtek GBTB86077US26 part number connects this exact handle to material lists and schedules, supporting orderly shower enclosure planning and coordinated bathroom hardware layouts.