Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Knoxville door pull is crafted for glass shower doors, so it serves as a dedicated handle solution where glass construction needs a purpose-built pull. This hardware is part of Emtek handles and pulls, tying it directly to a decorative hardware and moldings category that targets finished bath projects rather than rough openings. The pull is designed as a glass shower door back to back configuration, which means it provides a grip on both sides of the glass, helping users open and close the door smoothly from either direction. An 8 inch center to center layout fixes the hand positions at a comfortable spacing, which supports predictable reach and consistent appearance across multiple enclosures. The polished brass-lifetime finish gives the pull a brass look that complements many bathroom designs while maintaining a single, uniform appearance across all exposed surfaces.
This Knoxville door pull is tailored to fit glass door thickness between 1/4 inch and 1/2 inch only, so its components are sized for that clamping range rather than framed or thicker doors. The design relies on one grip with #10-32 threads in the stem and a mating grip with a 3/8 inch diameter hole in the stem, creating a through-glass connection that ties the two sides together. That stem arrangement helps center the pull on the glass and keeps the two faces aligned once tightened. The part is built as a glass shower door back to back pull, which means installers prepare paired holes and then secure both grips through the glass for a clean, hardware-based connection without additional brackets.
This Emtek Knoxville glass shower door back to back pull is intended for glass shower doors that fall between 1/4 inch and 1/2 inch thickness, so it addresses most typical residential and light commercial shower enclosures made from flat tempered glass in that range. The 8 inch center to center spacing makes it suitable where a mid-size pull is preferred, giving users enough grip length without overwhelming smaller doors. Because the pull is part of the Emtek handles and pulls product class, it aligns well with projects that already specify Emtek decorative hardware, supporting a consistent design language across the bath environment. The polished brass-lifetime finish lets the pull coordinate with polished brass faucets and trim, giving designers a single finish theme from door hardware to plumbing trim. Back to back construction places equal emphasis on both sides of the glass, which is useful on doors that are visible from the bath side and shower interior and need a finished appearance in both views.
The one grip with #10-32 threads in the stem and the mating grip with a 3/8 inch diameter hole in the stem establish a straightforward through-bolt connection, which simplifies aligning the two grips during installation because the fastener path is defined by the stem geometry. The pull uses two 3/8 inch diameter bevel head screws with #10-32 threads by 3/4 inch long and two 3/8 inch diameter bevel head screws with #10-32 threads by 7/8 inch long, giving installers screws sized to engage the threaded stem correctly across the supported glass thickness range. Those thread details matter because #10-32 threading is a familiar machine thread that fits standard tools, helping tradespeople work efficiently with known hardware. A set of gaskets is specified, which indicates a designed contact layer between metal and glass so the pull seats against the panel with a buffer rather than direct metal-to-glass contact. That arrangement supports a more controlled clamping force and helps maintain alignment over time on shower doors that see daily use. Together, the defined screw lengths, stem threading, and gasket use form a predictable stack for installers who need repeatable outcomes across multiple doors using glass in the 1/4 inch to 1/2 inch thickness band.
The Emtek Knoxville door pull is crafted for glass shower doors, so it is used where a glass panel needs a dedicated pull rather than a framed-door handle.
The Knoxville pull uses a back to back layout with one grip threaded at #10-32 and a mating grip, so the two sides clamp together through the glass panel.
The Emtek Knoxville door pull fits glass door thickness between 1/4 inch and 1/2 inch only, so it is sized for common shower glass panels in that range.
The Knoxville glass shower door pull has an 8 inch center to center dimension, which sets the spacing for drilling the two mounting holes in the glass.
The Emtek Knoxville door pull is finished in polished brass-lifetime, so it presents a polished brass look that coordinates with similarly finished bathroom hardware.
Manufacturer part number GBTB86077US3 identifies this exact Emtek Knoxville glass shower door back to back pull, helping match the same style on repeat projects.
The Emtek Knoxville door pull, glass shower door back to back, 8 inch center to center, is set up for glass door thickness between 1/4 inch and 1/2 inch, so it aligns with common shower glass used by many installers. Its polished brass-lifetime finish and coordinated Emtek handles and pulls classification position it well for projects that specify brass decorative hardware throughout the bath. With defined #10-32 threaded stems, 3/8 inch diameter screw details, and a purpose-built back to back layout, this pull offers a clearly specified hardware choice for glass shower doors that need consistent layout and appearance across a job.