Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Knoxville door pull is crafted for glass shower doors where a sturdy, stylish grip is needed on both sides of the panel. This pull is built as a back to back set, so you get a solid handle inside and outside the glass for confident operation. The 8 inch Center to Center layout spaces the grips for a natural, comfortable hand position, which helps users open and close the door without strain. The pull is finished in Unlacquered Brass, giving a warm metal surface that will show use over time, adding character that suits many bathroom styles. The construction is designed specifically for glass shower doors, so the components work together to secure the pull through the glass panel while maintaining an attractive appearance on both faces.
This Emtek Knoxville door pull fits glass door thickness between 1/4 inch and 1/2 inch only, so the through-glass connection is sized for common shower panels. That thickness range keeps the threaded engagement and clamping force in a practical zone, helping the grips stay tight under daily use. The pull uses a stem with #10-32 threads on one grip and a mating grip with a 3/8 inch diameter hole in the stem, creating a matched pair that fastens securely through the glass. This thread-and-hole setup directs the load along the fasteners and stems, which supports long-term stability when the door is opened and closed repeatedly.
The Knoxville door pull is intended for glass shower doors within the 1/4 inch to 1/2 inch thickness range, so it suits many framed and frameless residential shower panels built around those sizes. Its 8 inch Center to Center span works well on doors where a mid-height grip is preferred, giving enough length for a full hand hold without overwhelming narrower glass widths. The back to back configuration, with one grip using #10-32 threads in the stem and the other grip using a 3/8 inch diameter hole in the stem, is tailored for through-glass mounting, so both sides of the door share the same structural connection. The Unlacquered Brass finish suits bathrooms where exposed brass is part of the design, letting the handle visually tie together other brass elements in the space.
The Emtek Knoxville door pull uses #10-32 threads in one stem, which provides fine-thread engagement for controlled tightening against the glass, helping installers bring the assembly snug without abrupt jumps in clamping force. The mating grip with a 3/8 inch diameter hole in the stem pairs with 3/8 inch diameter bevel head screws, so the fastener and stem geometry align, improving contact and reducing wobble during tightening. Two 3/8 inch diameter bevel head screws with #10-32 threads by 3/4 inch long and two 3/8 inch diameter bevel head screws with #10-32 threads by 7/8 inch long give length options so the clamping components can be chosen to suit the specific glass thickness between 1/4 inch and 1/2 inch. This range of screw lengths allows the threaded portions to fully engage while keeping the heads properly seated, supporting a secure installation that resists loosening in regular shower use. The set of gaskets adds a layer between metal and glass, which helps distribute load at the contact points and reduces direct metal-to-glass contact during tightening.
The Emtek Knoxville door pull is crafted for glass shower doors, so its components and sizing are focused on through-glass mounting in typical shower applications.
The Emtek Knoxville door pull fits glass door thickness between 1/4 inch and 1/2 inch only, which covers many common residential shower glass panels.
The Knoxville pull has an 8 inch Center to Center dimension, giving users a comfortable hand spread and helping installers position matching pulls consistently across doors.
The Unlacquered Brass finish on this Emtek door pull is raw brass that will age naturally over time, creating a living finish that can develop patina with use.
The Knoxville back to back door pull uses a threaded stem on one grip and a mating grip with a 3/8 inch hole, clamped together through the glass for a solid handle on each side.
This Emtek pull provides 3/4 inch and 7/8 inch long bevel head screws with #10-32 threads, allowing the installer to match screw length to glass thickness within the 1/4 to 1/2 inch range.
The Emtek Knoxville door pull, model GBTB86077US3NL, brings an 8 inch Center to Center back to back grip tailored for glass shower doors between 1/4 inch and 1/2 inch thick. Its Unlacquered Brass finish supports designs that favor living metal surfaces, while the #10-32 threaded stem, 3/8 inch diameter stem hole, and matched bevel head screws provide the connection details needed for solid through-glass mounting. For projects calling for a glass shower door pull that combines a defined thickness range, back to back operation, and unfinished brass character, this Emtek Knoxville configuration is built to meet those requirements.