Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Ribbon & Reed door pull gives glass shower doors a defined grip point and a coordinated look on both sides of the panel. This glass shower door back to back pull is built as a matched grip pair so users have a solid handle inside and outside the shower, which helps day-to-day operation feel consistent and secure. The pull is described as an 8 inch Center to Center unit, so installers can plan hole locations around a known grip spacing that aligns with common shower door layouts. Its Ribbon & Reed styling shapes the contact area, which helps fingers register the handle quickly when hands are wet. The pull is finished in Polished Brass, so it visually ties into bathrooms using warm-toned trim and metalwork. The product is identified by Emtek as part number GBTB86080US3, giving shops a specific reference when matching this pull across multiple openings or future projects.
The Emtek Ribbon & Reed door pull is specified to fit glass door thickness between 1/4 inch and 1/2 inch only, so its through-glass connection and gripping range are tuned for this band of shower glass sizes. This fixed thickness range helps installers select the pull for panels that fall squarely inside those dimensions, supporting firm clamping without overextending the connection. The pull is described as a back to back configuration for glass shower doors, so its mounting concept depends on through-holes rather than surface mounting, which matters when planning fabrication or field drilling. By combining the stated 8 inch Center to Center spacing with the 1/4 to 1/2 inch glass thickness range, the pull provides defined geometry that can be reflected in shop drawings and drilling templates.
The Emtek Ribbon & Reed door pull is described as crafted for glass shower doors, so its role centers on hinged or sliding glass panels where through-bored hardware is appropriate. Because it is specifically identified as a glass shower door back to back pull, its intended position is on opposite faces of the same glass panel, allowing users to grasp a similar handle from either side. The stated 8 inch Center to Center measurement focuses its use on doors where that grip span suits both the door height and the typical hand position of users, which often works well on residential and light commercial showers. Its Polished Brass finish aligns visually with bathrooms that already feature polished brass faucets, trim, and other decorative hardware, which can streamline fixture coordination on remodel and new-build work. The Handles and Pulls, Emtek classification also places it alongside other decorative pulls, so designers building an Emtek-centered hardware schedule can treat this as the shower door counterpart to cabinet or entry pulls in similar finishes.
The Emtek Ribbon & Reed door pull uses an 8 inch Center to Center layout, so fabricators can repeat the same drilling pattern across multiple doors, which helps reduce layout variation from opening to opening. Its stated fit for glass door thickness between 1/4 inch and 1/2 inch only narrows the application window, which supports more predictable clamping performance because the hardware is sized for that thickness band. Being defined as a glass shower door back to back pull means the interior and exterior grips are mechanically linked through the door, which can distribute user loads more evenly across the glass surface. The Polished Brass-Lifetime notation ties the visual finish to long-term appearance goals, which matters when owners expect the shower door pull to maintain its look alongside other brass components over time. The explicit Emtek GBTB86080US3 identifier simplifies future matching or replacement because shops can reference the same part when adding new doors or updating existing ones built around this pull.
The Emtek Ribbon & Reed door pull is crafted for glass shower doors, so it suits glass panels in wet-area openings using through-bored back to back hardware.
The 8 inch Center to Center measurement defines the spacing between mounting points, so drilling patterns on glass can be set accurately before fabrication.
The Emtek Ribbon & Reed door pull fits glass door thickness between 1/4 inch and 1/2 inch only, so it is configured for commonly used shower glass sizes.
The pull is described as a glass shower door back to back pull, so matching grips sit on both sides of the glass and connect through the door.
The Emtek Ribbon & Reed door pull is finished in Polished Brass-Lifetime, so it visually aligns with polished brass bathroom fixtures and trim.
This Emtek glass shower door back to back pull is identified by manufacturer part number GBTB86080US3, which supports consistent specification and reordering.
The Emtek Ribbon & Reed door pull, glass shower door back to back, 8 inch Center to Center, brings a clear set of dimensions and a defined glass thickness range to shower hardware planning. Its specified fit for glass door thickness between 1/4 inch and 1/2 inch only, combined with the described back to back configuration, gives trades a focused solution for through-bored glass panels. With Polished Brass-Lifetime finish and the Emtek GBTB86080US3 designation, this pull slots directly into polished brass shower builds where consistent appearance and repeatable drilling patterns matter. For projects centered on glass shower doors within this thickness range, this Ribbon & Reed pull offers a precise, product-labeled option that aligns the grip style, finish, and geometry in one hardware choice.