Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Brisbane door pull identifies this pull as part of Emtek's Brisbane line, so installers can match it with other Emtek hardware on a project. The product is described as a door pull for glass shower doors, which positions it for wet-area openings where a solid gripping point is needed. This pull is defined as a back to back door pull, indicating a grip on each side of the glass so the user always has a handle whether entering or exiting. The center to center length is stated as 8 inch, which helps lay out hole spacing on the glass panel and align this pull with surrounding hardware. The finish is listed as Oil Rubbed Bronze, allowing this pull to coordinate with other bronze-finished hinges, faucets, and trim in the same opening.
The pull is specified as fitting glass door thickness between 1/4 inch and 1/2 inch only, which defines the usable range of glass panels it is meant to clamp to. This thickness range lets the installer select glass within that band and know the stems are proportioned to span the glass and tighten. The 8 inch center to center dimension gives a fixed distance between mounting points, so the glazier can drill two clean holes and expect the pull to sit aligned without adjustment slots. Together, these facts allow glass layout and hardware selection to be coordinated around defined measurements.
The product is identified as a glass shower door back to back pull, so its intended location is a swinging glass shower door with access from both sides. The fit statement of 1/4 inch to 1/2 inch glass directs it to common residential and light commercial shower glass thicknesses within that range. Because the pull length is given as 8 inch center to center, it suits doors where a mid-size handle is preferred rather than a very short knob or an oversized bar. The Oil Rubbed Bronze finish connects it to bath spaces using bronze-toned faucets, valves, and towel bars, allowing the pull to visually blend into that hardware package.
The description notes that this is an Emtek Brisbane door pull for glass shower doors, so fabricators and installers can specify the exact line and appearance by name in drawings. The 8 inch center to center dimension provides a single consistent hole spacing, which helps reduce layout errors and keeps multiple doors on a project visually aligned. The back to back configuration means the two grips oppose each other across the glass, which balances pulling forces on the panel and supports smooth operation over time. The stated fit for 1/4 inch to 1/2 inch glass guides selection of glass thickness that the stems are designed to clamp, helping the pull seat properly against the glass faces when tightened.
The Emtek Brisbane door pull is described as crafted for glass shower doors, so it is intended for use on glass shower door panels in bath environments.
The pull fits glass door thickness between 1/4 inch and 1/2 inch, so it is sized for glass panels within that specific thickness range.
The pull is described as an 8 inch center to center door pull, which sets the distance between mounting points for drilling and layout.
This specific Emtek Brisbane pull is finished in Oil Rubbed Bronze, aligning it with other bronze-finished bathroom and shower hardware.
Back to back means there is a grip on each side of the glass connected through the panel, providing a handle from both the inside and outside.
The manufacturer part number is GBTB86170US10B, which identifies this exact Oil Rubbed Bronze Brisbane 8 inch glass shower door pull.
The Emtek Brisbane door pull brings an 8 inch center to center layout, a back to back configuration, and fit for 1/4 inch to 1/2 inch glass, which together define how it interfaces with a shower door panel. The Oil Rubbed Bronze finish and named Brisbane design line position it for projects that coordinate bronze bath hardware with glass doors. When those dimensions, finish, and glass thickness parameters align with the job, this pull offers a clearly defined option for glass shower door gripping points.