Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Baden door pull gives glass shower doors a defined gripping point, so the door can be opened and closed with a steady hand. This glass shower door pull is designed as a back to back set, allowing a user to grip from either side of the glass for consistent operation. The pull is crafted for glass shower doors, which directs its use to wet bathroom environments where a solid handhold matters. An 8 inch Center to Center dimension spaces the contact points on the glass, which spreads the load and supports a balanced feel when the door is moving. The flat black finish presents a dark, uniform surface, which visually pairs with many bathroom fixtures that follow the same color tone. This finish also outlines the pull clearly against clear glass, which can help users visually locate the handle on a busy shower wall.
The pull fits glass door thickness between 1/4 inch and 1/2 inch only, which defines the range where the stems and fastening system can clamp the glass reliably. This thickness range allows the installer to select the pull for a variety of common shower glass panels while keeping the grip centered. The back to back layout uses opposing grips through the glass, and this configuration depends on that thickness range so the components can draw together properly. The 8 inch Center to Center dimension also gives a known spacing when drilling glass, which supports consistent hole placement across multiple doors in the same bathroom or across a larger project.
This Emtek Baden door pull is crafted for glass shower doors, so it is oriented around interior bathroom use rather than solid wood or metal doors. The design as a glass shower door back to back pull means it operates as a pair, with one grip on each side of the glass panel to manage the door swing. The 8 inch Center to Center measurement helps it fit comfortably on typical residential shower door heights, providing enough separation for a full hand grip without overwhelming the glass visually. Flat black finish lets the pull coordinate with other black bathroom fittings, which supports a consistent visual line when matched with hinges, faucets, and trim. The defined fit for glass thickness between 1/4 inch and 1/2 inch focuses its role on many standard tempered shower glass panels used in residential projects.
The 8 inch Center to Center spacing gives a fixed layout for drilling through the glass, supporting repeatable placement when multiple doors on a job require the same pull. Because the pull functions as a back to back assembly on the glass, alignment between the interior and exterior grips is controlled by that same spacing, which promotes a straight, parallel feel when the user grasps both sides. The specification that it fits glass door thickness between 1/4 inch and 1/2 inch sets the clamping window, so the fastening system can generate compression on the glass without overextending or leaving excess play. The flat black finish defines the surface appearance of the pull, which matters in projects where matching visible hardware is part of the design scope. The clear identification as an Emtek Baden door pull, with manufacturer part GBTB86184US19, allows the same model to be specified again when additional doors are added to a space later.
The Emtek Baden door pull is crafted for glass shower doors, so it is intended for use on glass shower panels in bathroom environments where that door type is present.
The Emtek Baden glass shower door back to back pull uses a grip on each side of the glass, so users can open or close the shower door from either side using a similar hand position.
The Emtek Baden door pull has an 8 inch Center to Center measurement, which defines the distance between the two mounting points drilled through the glass panel.
The Emtek Baden door pull fits glass door thickness between 1/4 inch and 1/2 inch only, setting the acceptable range where its stems and fasteners can clamp the glass correctly.
The flat black finish on the Emtek Baden pull provides a dark, uniform appearance, helping the handle coordinate with other black fixtures and stand out against clear or light-colored surfaces.
Emtek part number GBTB86184US19 uniquely identifies this Baden glass shower door back to back pull in flat black, supporting accurate specification and repeat purchasing for matching installations.
The Emtek Baden door pull as glass shower door back to back hardware focuses on doors with glass thickness between 1/4 inch and 1/2 inch, anchoring its role on that range. The 8 inch Center to Center spacing offers a repeatable drill pattern, which is valuable when several doors on a project must align visually. The flat black finish supplies a coordinated look with other black elements, keeping the hardware consistent across the bathroom. For projects built around glass shower doors that match this thickness range and layout, this Emtek Baden pull provides a clearly defined option.