Emtek Transitional Heritage Westwood appliance pull is crafted for glass shower doors, so it serves as a dedicated pull where a solid, comfortable grip is needed on both sides of the glass. The 12 inch Center to Center layout sets the mounting points, which helps align drilling and keeps the handle span consistent with other 12 inch pulls in a project. This pull is designed in a back to back configuration, meaning each side of the glass has a grip connected through the door for secure handling. The Satin Nickel finish provides a refined look that coordinates with many bathroom fixtures, supporting cohesive design on renovation or new-build jobs. As an Emtek pull, it fits into the Transitional Heritage Westwood family, which helps match this handle with other pieces from the same design line.
This Emtek Transitional Heritage Westwood appliance pull fits glass door thickness between 1/4 inch and 1/2 inch only, so the through-glass connection is sized to clamp properly within that range. The pull uses one grip with #10-32 threads in the stem and one mating grip with a 3/8 inch diameter hole in the stem, which defines how the two sides draw together through the glass. Two 3/8 inch diameter bevel head screws with #10-32 threads by 3/4 inch long and two 3/8 inch diameter bevel head screws with #10-32 threads by 7/8 inch long provide different engagement lengths, giving options to match varying glass thicknesses within the stated range. A set of gaskets is provided for the assembly; these sit between the grip hardware and the glass surface, which helps create a more forgiving contact area.
This Emtek Transitional Heritage Westwood appliance pull is crafted for glass shower doors, so its primary use is on residential or light commercial shower enclosures that use glass panels within the stated thickness range. The 12 inch Center to Center dimension suits doors where a longer handhold is preferred, such as full-height shower doors where users grasp the pull at different heights. Because the pull is a back to back configuration, each glass shower door fitted with it gains a substantial grip on both the inside and outside, which supports frequent opening and closing from either side of the enclosure. The Satin Nickel finish lets the same pull work in bathrooms with brushed nickel or similar-toned fixtures, which allows this part to be specified across several bathrooms with consistent appearance. As part of Emtek's Transitional Heritage Westwood line, it can also be used where that design language is already present on other doors or cabinetry nearby.
The defined fit for glass door thickness between 1/4 inch and 1/2 inch only helps maintain proper clamping pressure when the two grips are tightened together, supporting long-term alignment of the pull on the glass. The use of a stem with #10-32 threads on one grip and a 3/8 inch diameter hole on the mating grip establishes a clear direction for assembly, which helps repeat the same orientation on multiple doors in a project. Two sets of 3/8 inch diameter bevel head screws, in 3/4 inch and 7/8 inch lengths, allow installers to select a screw length that suits the specific glass thickness within the range, which can improve the thread engagement without excessive projection past the grip. The set of gaskets between the grips and the glass adds a buffer layer, which supports a more even load on the glass and a cleaner finished interface against the door surface. With its 12 inch Center to Center spacing and Satin Nickel finish combined, this pull offers a consistent visual and functional element wherever that dimension and appearance are part of the design plan.
The Emtek Transitional Heritage Westwood appliance pull is crafted for glass shower doors, so it is intended specifically for use on glass shower enclosures.
This Emtek pull fits glass door thickness between 1/4 inch and 1/2 inch only, which defines the acceptable glass range for proper clamping.
The pull has a 12 inch Center to Center measurement, so the mounting holes on the glass door are spaced 12 inches apart.
This Emtek appliance pull is a back to back configuration, meaning there is a grip on each side of the glass door connected through the glass.
The Transitional Heritage Westwood appliance pull is finished in Satin Nickel, which offers a refined, neutral metallic look on bathroom doors.
The manufacturer part number for this Emtek Transitional Heritage Westwood pull is GBTB86912US15, which identifies this specific size and finish.
The Emtek Transitional Heritage Westwood appliance pull, model GBTB86912US15, combines a 12 inch Center to Center span with a back to back layout for glass shower doors between 1/4 inch and 1/2 inch thick. The Satin Nickel finish and defined hardware arrangement support a consistent, project-ready solution for shower doors that follow the same sizing and style parameters.