HP-660 weld-on hasp is a 6 inch long stainless steel hasp designed for welding onto metal doors, frames, or fixtures where a permanent latch point is needed. The hasp is made of 316 stainless steel, which resists corrosion in demanding environments and supports long-term use in metalwork or cabinetry projects that see moisture or cleaning chemicals. The electro polished stainless steel finish creates a smooth surface that is easy to wipe down and presents a clean, professional look on exposed hardware. As a NSF component, this hasp supports applications where sanitary-friendly hardware is important, such as food-related or washdown areas. The product sits in the slide bolts and hasps class, so it pairs naturally with padlocks or other locking hardware when a durable weld-on anchor is required.
This Sugatsune America weld-on hasp is intended to be welded directly to a suitable metal surface, integrating the HP-660 firmly into the door or frame structure. The 6 inch by 2 inch size gives a clear visual footprint for layout and alignment before welding, simplifying positioning relative to a mating lock or bolt. Being a weld-on design, the hasp becomes a fixed part of the assembly, which helps resist prying forces that can act on surface-mounted hardware. The 316 stainless steel material responds well to typical stainless welding methods, supporting consistent attachment in shop or field fabrication environments. Once welded, the electro polished finish helps the surrounding weld area present a clean, consistent look on the finished job.
This HP-660 hasp from Sugatsune America is suited to latching setups where stainless steel hardware is required and NSF component status supports hygiene-focused projects. The 316 stainless steel construction allows the hasp to perform in areas where contact with water, cleaning agents, or corrosive atmospheres is expected, so it works well in environments that place stress on ordinary steel hardware. Its electro polished finish creates a smoother stainless surface, which assists in cleaning regimes and provides a sharp finished look across matching stainless assemblies. The slide bolts and hasps product class places this part naturally in door, gate, or panel latching layouts that rely on a welded anchor point for padlocks or similar locking devices.
The HP-660 hasp is specified at 6 inches in length and 2 inches in width, giving a defined geometry for aligning with matching slide bolts, locks, or catches. That length allows more flexibility in locating the padlock eye or latch hole relative to the door edge or frame, which helps when working around existing hinges or structural members. The 2 inch width offers a balanced weld footprint so the hasp seats flat on the substrate, supporting an even weld bead and stable load transfer when the latch is under tension. Made entirely from 316 stainless steel, the weld zone and the working portion of the hasp share the same corrosion-resistant material, which supports uniform performance over time. The electro polished finish carries across the visible stainless surfaces, giving a consistent appearance that suits professional metalwork and cabinetry installations.
The HP-660 weld-on hasp is specified at 6 inches in length and 2 inches in width, giving a clear footprint for layout and welding on doors, frames, or panels.
The Sugatsune HP-660 hasp is made of 316 stainless steel, which supports corrosion resistance and long-term performance in demanding or frequently cleaned environments.
The HP-660 hasp is a weld-on design, so it is intended to be welded directly to a suitable metal surface for a permanent, integrated latch point.
The HP-660 hasp uses an electro polished stainless finish to provide a smooth, cleanable surface and a uniform appearance on exposed stainless installations.
The HP-660 hasp is identified as a NSF component, so it is suitable for applications where hardware needs to meet NSF component criteria in hygiene-focused projects.
The HP-660 weld-on hasp belongs to the slide bolts and hasps product class, aligning it with hardware used to create secure latch and lock points.
The HP-660 weld-on hasp from Sugatsune America combines 316 stainless steel, a 6 inch by 2 inch footprint, and an electro polished finish to support demanding latch installations. As a NSF component in the slide bolts and hasps class, it fits projects where welded stainless latching is preferred over surface-mount solutions. For installers and fabricators working with metal doors, frames, gates, or panels, this weld-on hasp provides a defined geometry and material package for building secure, corrosion-resistant latch points in professional environments.