NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC81247UF1 to RSFSC81247UF1.
Omega National curved floating shelf describes a 24 inch wide by 10 inch deep curved floating shelf in rift white oak that delivers a clean, modern presentation while keeping wall space open. The subtly curved 8-1/2 inch radius front edge shapes the face profile, which adds visual interest when shelving lines run across a wall. Solid wood and wood veneer construction provides a robust shelf body, so the panel supports everyday loads in typical closet, kitchen, or garage organization layouts. The manufacturer designs this shelf as part of a floating shelves and concealed brackets system, so the wall side stays clean without external supports showing. Rift white oak material sets a consistent grain look, which simplifies matching to other rift-cut oak components on a job. The shelf ships sanded and ready to finish, giving installers control over stain, clear coat, or paint systems to align with surrounding millwork.
The shelf uses a unique hanging system with concealed brackets, so the hardware sits inside the shelf body while the wall face stays clear. That hidden bracket approach supports a 100 lb capacity, which matters when shelves carry dense items in kitchens, home offices, or garages. Standard brackets are part of the system design, giving installers a defined interface for laying out bracket locations on studs. The manufacturer describes this as a turn-key system with mounting hardware and installation instructions, so the hanging method follows a consistent pattern from job to job. No visible hardware on the finished face delivers the familiar floating shelf effect, which helps designers run continuous lines of shelving without interruption from external supports.
This curved 24 inch by 10 inch rift white oak floating shelf sits in the shelf, closet, and garage organization category, which positions it for open wall storage runs in built-in projects. The 10 inch standard depth suits shallow wall storage above counters, dressers, or workbenches, where overhang must stay tight to avoid crowding the workspace. In closets, that depth pairs well with folded clothing and bins, giving adequate support depth while keeping aisles clear. The rift white oak material and solid wood and veneer construction make the shelf useful in visible living areas such as family rooms or kitchens, where grain character matters for open shelving. Because the front edge follows an 8-1/2 inch radius curve, designers can break up long straight walls or frame focal areas, such as around a range hood or media center, with softer lines that still read as controlled and intentional.
The Omega National curved floating shelf relies on a unique hanging system with concealed brackets, which keeps the interface between shelf and wall consistent across installations. That predictable interface simplifies measuring bracket spacing and drilling shelf penetrations when multiple shelves are stacked or aligned. The 100 lb capacity at the hanging brackets gives installers a defined performance target, helping them plan stud engagement and layout when heavy objects may sit on the shelf. Meeting or exceeding BHMA standards for safety and strength establishes a third-party performance benchmark, which is useful when documenting hardware choices for builders or designers. The sanded and ready to finish shelf surface allows finishing crews to run the same stain or coating schedule as surrounding cabinetry, which reduces color variation across a room. Standard brackets are part of the defined system, and a heavy-duty upgrade is available, so specifiers can select the level of support performance that matches anticipated loading conditions. A standard depth of 10 inches, with a 12 inch depth available by special order, provides a straightforward sizing decision for most projects while still allowing a deeper option when layouts demand additional projection.
The Omega National FSC81247UF1 shelf measures 24 inches wide by a standard 10 inches deep, giving a compact span suited to typical wall bays and above-counter runs.
This curved floating shelf system is rated at 100 lb capacity at the hanging brackets, which supports substantial loads when shelving is used for dense items along a wall.
The shelf uses solid wood and wood veneer construction in rift white oak, providing a real-wood surface that accepts finish and aligns with rift-cut oak millwork.
The 8-1/2 inch radius front edge slightly curves the face, softening the front line while maintaining usable depth for stored items across the shelf.
This Omega National curved floating shelf uses a unique hanging system with concealed brackets, creating a clean floating effect without visible hardware on the wall face.
The curved rift white oak floating shelf is sanded and ready to finish, so finishing crews can apply chosen stains or coatings to match surrounding cabinetry and trim.
The Omega National 24 inch by 10 inch rift white oak curved floating shelf combines solid wood and veneer construction, a 100 lb capacity hanging bracket system, and a subtly curved 8-1/2 inch radius front edge. That mix gives designers and installers a defined, BHMA-tested floating shelf solution that works in closets, garages, and finished living spaces. The sanded, ready-to-finish surface and no visible hardware presentation help the shelf blend into custom millwork packages while still carrying real storage loads. For projects calling for a modern floating shelf in rift white oak with a controlled size and performance rating, this FSC81247UF1 model provides a clear, job-ready option.
Sold In: 1 Each