NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC8124HUF1 to RSFSC8124HUF1.
Omega National 24 x 10 curved floating shelf is a hickory shelf designed for wall-mounted storage and display where a modern, minimal look is important. The subtly curved 8-1/2 inch radius front edge shapes the visible face, so the installed shelf presents a softer profile that can complement both straight cabinetry lines and curved design elements. Solid wood and wood veneer construction form the shelf body, giving the installer a stable, woodworking-friendly surface that works with typical shop finishing processes. The standard 10 inch depth sets the projection off the wall, so the shelf offers practical storage space while staying in proportion over counters, dressers, or closet components. A complete turn-key system is provided by the manufacturer description, so the mounting method, bracket design, and load capacity are engineered together for consistent, repeatable installs.
The hanging system referenced for this Omega National curved floating shelf uses concealed brackets, so the structural support sits inside the shelf and against the wall instead of below it. This bracket approach leaves the underside open, which keeps tile, paint, or paneling uninterrupted beneath the run. The shelf is sanded and ready to finish from the supplier description, so stain, clear coat, or paint steps can be scheduled directly into the finishing workflow without preliminary surface preparation on site. The product meets or exceeds BHMA standards for safety and strength, aligning performance with recognized benchmarks so specifiers can match this shelf to broader hardware standards in a project.
The 24 inch width and 10 inch depth of this Omega National 24 x 10 curved floating shelf position it well for use over dressers, desks, or base cabinets where a single span of storage is needed. Hickory material and veneer construction let the shelf visually coordinate with hickory cabinetry or trim, so it can sit in the same room as matching casework without introducing a different species. In closet and garage organization layouts, the standard depth aligns with many hanging and shelf systems, allowing this shelf to integrate into wall runs while maintaining usable hanging depth below. The subtly curved 8-1/2 inch radius front edge reads as a design detail at eye level, which can help tie together multiple shelves or align with curved profiles on nearby components. Floating shelf classification and concealed bracket design place the structural support inside the shelf, which frees wall space below for hooks, backsplashes, or continuous panels without bracket interruptions.
The fixed 24 inch by 10 inch size of this 24 x 10 hickory floating shelf simplifies layout, because installers can repeat drill patterns and bracket locations across several units on a wall. The 100 lb capacity hanging brackets are specified with this shelf, so the load rating is matched to the shelf span and material, helping planners assign appropriate uses such as books, folded clothes, or decorative items without over-engineering supporting structure. The unique hanging system is described as ensuring quick installation and long-term durability, so crews can work with a consistent bracket interface that speeds alignment while supporting repeated loading over years of use. No visible hardware is part of the design, which avoids the need to coordinate exposed bracket finishes with pulls or hinges elsewhere in the room. Sanded and ready to finish construction allows the finishing shop to apply stains or paints directly, so color matching to existing millwork becomes a straightforward finishing decision rather than a fabrication change. Meeting or exceeding BHMA standards for safety and strength connects this shelf to recognized performance criteria, giving project teams a concrete reference point when documenting hardware and shelving components across a job.
The Omega National 24 x 10 curved floating shelf has a 24 inch width and a standard 10 inch depth, which sets the wall projection and helps with planning clearances and storage capacity.
The hickory curved floating shelf uses 100 lb capacity hanging brackets, so it is designed to support substantial everyday loads when properly mounted to a suitable wall structure.
The floating shelf has a subtly curved 8-1/2 inch radius edge at the front, so the visible face presents a soft curve instead of a straight line across the span.
The Omega National curved floating shelf is sanded and ready to finish, allowing stains, paints, or clear coats to be applied directly as part of the finishing workflow.
The Omega National curved floating shelf uses solid wood and wood veneer construction, providing a stable, woodworking-friendly structure suitable for custom finishing and standard shop processes.
The shelf uses a unique hanging system with no visible hardware, so the finished installation shows a clean floating effect with uninterrupted wall surfaces beneath the shelf.
The Omega National 24 x 10 curved floating shelf in hickory combines solid wood and wood veneer construction with a curved 8-1/2 inch radius front edge, so it fits projects that prioritize both structure and visual detail. A unique hanging system with 100 lb capacity brackets and no visible hardware supports installs where a clean floating effect and dependable load rating are required on the same run. Sanded, ready-to-finish construction means color and sheen can be matched to surrounding casework without changing the core product. For hickory-based wall storage or display runs that call for a concealed bracket floating shelf, this FSC8124HUF1 model aligns with those requirements.
Sold In: 1 Each