Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC81307UF1 to RSFSC81307UF1.
Omega National 30 x 10 D Curved Floating Shelf gives a 30 inch wide, 10 inch deep storage surface that works well where a defined span and depth are needed on walls or casework. The shelf is rift white oak, so the vertical grain pattern reads clean and consistent in installed runs. The subtly curved 8-1/2 inch radius edge breaks up straight cabinet lines and adds a softer front profile in living areas, closets, or office walls. Solid wood and wood veneer construction provides a real-wood surface that takes standard woodworking finishes consistently across the face and edge. Paint-grade versions are made from poplar and MDF, so finishing workflows can match painted millwork on adjacent cabinetry. The design is part of Omega National Products floating shelves and concealed brackets class, so it integrates into wall layouts where concealed support is important.
The unique hanging system uses 100 lb capacity hanging brackets so the shelf seats firmly on concealed supports while carrying typical wall-load applications. No visible hardware at the front or underside means the rift white oak face and curved 8-1/2 inch radius edge remain uninterrupted once mounted. Standard depth at 10 inches simplifies layout against typical studs and finished walls because installers work with a consistent projection. Sanded and ready to finish construction lets finishing happen after mounting, so the installed shelf can be toned or painted to match surrounding millwork and wall colors in place. The system is designed to meet or exceed BHMA standards for safety and strength, providing a tested baseline for performance in typical residential or light commercial wall conditions.
This curved 30 inch rift white oak floating shelf fits projects calling for a modern, open-shelf look with concealed support. The 30 inch width suits single-bay wall sections, smaller alcoves, or repeated modules across a longer run, so designers can build symmetrically spaced layouts. Because the standard depth is 10 inches, this shelf serves well in living rooms, home offices, and closets where projections must remain practical for walk-by areas. The subtly curved 8-1/2 inch radius front edge keeps the profile from reading as a simple board on the wall, which helps when shelves are installed at eye level. Solid wood and wood veneer construction let the installed piece read as finished furniture-grade shelving once stained or clear-coated on site.
The unique hanging system is engineered as a complete turn-key approach with 100 lb capacity hanging brackets, so installers work with known hardware and a defined load rating instead of improvising supports. No visible hardware creates a clean floating effect, letting the wall surface and rift white oak grain carry the visual weight rather than brackets or cleats. Sanded and ready to finish material saves prep time because the surface arrives at a stage suited for stain, clear finish, or paint, which helps standardize workflows between the shop and jobsite. Meeting or exceeding BHMA standards for safety and strength means the assembly is tested against established benchmarks, providing a documented performance level for typical wall-shelf applications. A standard 10 inch depth keeps drilling, bracket layout, and spacing consistent from shelf to shelf, reducing layout time on multi-shelf installations. The option of heavy-duty bracket upgrades, referenced alongside the standard brackets, allows project planners to specify higher-capacity support where loading demands are greater, while maintaining the same concealed mounting concept and visual appearance across all shelves.
The Omega National 30 x 10 D Curved Floating Shelf provides a 30 inch wide, 10 inch deep surface, so layouts can be planned around those fixed dimensions on wall sections or between cabinets.
The shelf uses solid wood and wood veneer construction in rift white oak, giving a real-wood surface that accepts stains or clear finishes predictably across face and edges.
The system uses 100 lb capacity hanging brackets, so the installed shelf is rated to handle typical decorative and light storage loads within that capacity range.
Sanded and ready to finish means the shelf surface arrives prepared for stain, clear coat, or paint, which streamlines finishing work once the shelf is mounted on the wall.
The curved 8-1/2 inch radius edge softens the front profile, giving a more refined appearance while leaving the back edge straight for predictable wall alignment.
This curved floating shelf system meets or exceeds BHMA standards for safety and strength, providing tested performance benchmarks for typical wall-shelf installations.
The Omega National 30 x 10 D Curved Floating Shelf in rift white oak brings a defined 30 inch span, 10 inch depth, and 100 lb capacity hanging brackets together in one system. The unique hanging system with no visible hardware supports clean, modern designs where supports stay hidden. Sanded and ready to finish construction lets you match existing stains, clear finishes, or paints directly on site. When a curved 8-1/2 inch radius front edge and BHMA-tested strength fit your wall-shelf plan, this model aligns well with projects demanding a concealed, furniture-grade floating shelf solution.
Sold In: 1 Each