Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC8130EUF1 to RSFSC8130EUF1.
30 inch walnut curved floating shelf describes a curved 30 inch Walnut Floating Shelf from Omega National Products designed to bring a fresh, modern look to a wall run. The subtly curved 8-1/2 inch radius edge changes a standard straight shelf into a feature piece, which helps closets or open-wall displays read more finished. Solid wood and wood veneer construction support everyday storage, while the floating design creates a seamless visual line, useful when running multiple shelves on the same wall. The standard 10 inch depth gives space for folded clothing, smaller bins, or display items without pushing too far into the room, which helps in tight closet or hallway layouts. Sanded and ready to finish construction lets the installer match existing cabinetry or trim, so a single shelf can tie into a broader project.
This curved Walnut Floating Shelf uses a unique hanging system engineered as part of a complete turn-key setup, so the shelf locks onto its brackets for quick installation. The standard hanging brackets provide a 100 lb capacity, allowing the shelf to support a mix of folded garments, stacked items, or decor in a typical closet or wall application. No visible hardware at the front or underside keeps the focus on the curved 8-1/2 inch radius edge, which is useful when shelves are mounted at eye level. The 10 inch standard depth pairs with the 30 inch length to create a balanced footprint that works well between typical closet uprights or on open wall sections.
The Omega National 30 inch x 10 inch D Curved Floating Shelf in walnut slots easily into closet, garage, or general organization layouts that call for a modern look. The 8-1/2 inch radius curved edge adds a soft front line, which helps break up long, straight banks of shelving while still keeping a square back edge to sit tight to the wall. Because the shelf is sanded and ready to finish, it can be tinted to resemble existing walnut pieces or coated to coordinate with mixed-species cabinetry, so it adapts to both new builds and remodels using current finishes. The standard 10 inch depth supports folded clothing, shoes, or smaller storage bins without overwhelming the vertical space, which is useful when combining this shelf with hanging rods or taller cabinet sections. In living areas, the solid wood and wood veneer construction gives the shelf a furniture-like presence, which works well for open display shelving along feature walls.
The unique hanging system on this curved Walnut Floating Shelf is designed to ensure quick installation and long-term durability, which matters when setting multiple shelves to a consistent line. With 100 lb capacity hanging brackets, the shelf is built to handle typical loads without sagging across its 30 inch span, helping protect finish work over time. The no visible hardware design keeps bracket components concealed, so layout lines can focus on shelf spacing rather than hardware placement, useful when aligning several shelves across a room. Meeting or exceeding BHMA standards for safety and strength adds a level of tested performance, which supports use in more demanding residential storage zones. The sanded and ready to finish surface means less prep before stain or paint, helping finishers move directly into coating and reducing time between install and project turnover.
The Omega National curved floating shelf is 30 inches long with a standard depth of 10 inches, which sets a compact footprint suited to closets, garages, and general wall storage.
The subtly curved 8-1/2 inch radius front edge softens the profile and adds visual interest, helpful when the shelf is installed at eye level or in long runs.
The curved walnut floating shelf uses hanging brackets rated for 100 lb capacity, allowing it to support typical clothing, storage, or display loads on a 30 inch span.
The walnut curved floating shelf has no visible hardware, so once mounted it presents as a clean, seamless band of wood, matching modern and minimalist interiors.
The shelf is sanded and ready to finish, so stain, clear coat, or paint can be applied directly, helping match surrounding cabinetry and reducing prep time on site.
The curved walnut floating shelf meets or exceeds BHMA standards for safety and strength, indicating that its design and hanging system have been tested for load and stability.
The Omega National 30 inch x 10 inch D Curved Floating Shelf in walnut combines solid wood and wood veneer construction with a unique hanging system, so it delivers a modern floating look with tested strength. The 8-1/2 inch radius curved edge and no visible hardware design keep sightlines clean in closets, garages, and open-wall storage. Sanded and ready to finish construction lets you align stain or paint with the rest of the project. Use this curved walnut floating shelf when a 30 inch span, 10 inch depth, and 100 lb capacity match the storage run you are building.
Sold In: 1 Each