Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC81427UF1 to RSFSC81427UF1.
Omega National 42 x 10 curved floating shelf describes a 42 inch long, 10 inch deep rift white oak shelf that mounts with concealed hardware, giving a clean floating look that suits closets, garages, or open-wall storage runs where visible brackets are not desired.
The shelf is part of Omega National Products floating shelves and concealed brackets line, so it is designed as a structural shelf component rather than decorative trim, helping installers build usable storage while keeping the hardware out of sight.
The curved 42 rift white oak shelf uses a subtly curved 8-1/2 inch radius edge, which softens the front profile and reduces sharp corners along the run, a detail that can matter in tight walk-by areas or at the end of a cabinet line.
Solid wood and wood veneer construction provides a shelf body built from real wood materials, giving a substantial feel for storage and a surface that can be worked using standard woodworking tools common in cabinet shops.
The shelf is sanded and ready to finish, so it arrives prepared for staining, clear coating, or painting steps in the shop or on site, saving prep time and supporting color matching with existing casework or trim schedules.
The system meets or exceeds BHMA standards for safety and strength, so the manufacturer has designed the shelf and hanging approach for load and performance expectations typically used in architectural hardware components.
The floating shelf uses a unique hanging system with dedicated hanging brackets, giving the installer a defined method for supporting the load and setting the shelf level, which can reduce trial-and-error when lining up multiple shelves.
The brackets are rated for 100 lb capacity, so the combined shelf and bracket system is engineered for substantial stored weight, supporting use in closets or garages where heavier folded items, bins, or supplies are common.
The same hanging system is designed for quick installation, which matters when multiple shelves must be set on a long wall, because consistent mounting points and bracket engagement reduce layout and adjustment time.
The no visible hardware design means the brackets are concealed within or behind the shelf structure during mounting, allowing the finished installation to show only the wood surface without exposed metal supports.
The system offers standard brackets with a heavy-duty upgrade available, providing a defined path to higher load support or more demanding installations while keeping the basic layout approach familiar.
The rift white oak floating shelf is categorized under shelf, closet, and garage organization, so it is suitable for storage applications where open shelving is needed rather than enclosed cabinetry, such as closet walls, utility areas, or garage organization zones.
The 42 inch length works well between common stud spacings and typical closet or wall sections, helping installers integrate the shelf into framed walls without excessive cutting, especially when laying out multiple shelves in repeated bays.
The 10 inch standard depth keeps the shelf shallower than deep countertop-style surfaces, which can help maintain floor clearance in tight walkways while still offering usable storage space for folded clothing, shoes, or small containers.
The curved leading edge, defined by the 8-1/2 inch radius, makes this shelf particularly suited to exposed ends of runs or single-feature shelves where visual interest and a softer edge are preferred over a sharp rectangular face.
Because the shelf is built from solid wood and wood veneer, it fits into projects that already rely on wood components, allowing designers and installers to present a unified material story across cabinets, shelves, and trim.
The rift white oak material gives the surface a distinctive grain character that can be highlighted with clear finishes, supporting projects where wood grain is meant to remain visible rather than being fully concealed under opaque coatings.
The unique hanging system is engineered for quick installation, so the bracket layout and engagement method are consistent from shelf to shelf, supporting repeatable results on multi-shelf walls and reducing layout differences between installers.
The 100 lb capacity rating provides a fixed design load for planning, allowing trades to assign the shelf to storage tasks within that performance envelope rather than guessing at allowable load for the concealed bracket system.
The no visible hardware floating effect simplifies visual alignment decisions, because the installer aligns the wood shelf to reference lines, tile courses, or existing cabinets without having to coordinate visible bracket positions.
The sanded and ready to finish surface reduces the chance of uneven absorption caused by rough milling, supporting more predictable staining or clear finishing results across the visible faces once finishing products are applied.
Solid wood and wood veneer construction allows minor edge tuning or easing with standard sanding tools in the field, which can help achieve tight corner transitions or smooth joints when the shelf terminates into adjacent walls or panels.
The product being part of Omega National Products floating shelves and concealed brackets family means other shelves in the same line can share similar installation logic, which is helpful for shops that standardize on one system across many projects.
The identification as manufacturer part number FSC81427UF1 gives installers and purchasing teams a specific reference when documenting project hardware schedules, reducing confusion during ordering or when matching replacement shelves later.
The combination of curved front edge, concealed hanging brackets, and BHMA-compliant safety and strength performance supports repeatable, professional-looking installations where appearance and load performance both matter.
The Omega National 42 x 10 curved floating shelf is 42 inches long with a standard 10 inch depth and a subtly curved 8-1/2 inch radius front edge, which defines its wall projection and visible profile.
The curved 42 rift white oak floating shelf uses hanging brackets rated at 100 lb capacity, allowing it to handle substantial storage loads when used within that rating in closet or garage organization layouts.
The shelf uses solid wood and wood veneer construction, with paint-grade versions described as poplar and MDF, providing a wood-based structure suitable for typical cabinet shop machining and finishing processes.
The rift white oak floating shelf is sanded and ready to finish, so it is prepared for staining, clear coating, or painting steps without extensive initial sanding or surface leveling work.
The shelf uses a unique hanging system with concealed hanging brackets, so once mounted, no visible hardware shows, leaving only the wood shelf apparent on the wall for a clean floating effect.
The FSC81427UF1 designation is the Omega National manufacturer part number for this 42 x 10 curved rift white oak floating shelf, aiding accurate specification, reordering, and coordination on project documents.
The Omega National 42 x 10 curved floating shelf in rift white oak combines a BHMA-compliant floating shelf and bracket system with a curved 8-1/2 inch radius edge, giving trades a concealed-support shelf that balances appearance with defined 100 lb load capacity.
The standard 10 inch depth, solid wood and wood veneer construction, and sanded, ready-to-finish surface streamline layout, machining, and finishing steps, making this FSC81427UF1 shelf a practical choice wherever open, hardware-free shelving is part of the design.
Sold In: 1 Each