NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC8142CUF1 to RSFSC8142CUF1.
Omega National curved floating shelf gives a 42 inch wide cherry shelf with a subtly curved 8-1/2 inch radius edge, so wall runs gain a modern profile that softens straight cabinet lines. Solid wood and wood veneer construction provides a real-wood shelf surface, which supports common closet and garage organization layouts that call for a finished appearance. The standard 10 inch depth keeps items close to the wall, which helps projects where aisles and walkways must stay clear. No visible hardware creates a true floating look along the wall, so the shelf reads as a clean design element above cabinets or in open wall space. Sanded and ready to finish material lets you stain or topcoat to match surrounding millwork, so the shelf integrates with existing trim, doors, or casework without extra preparation work.
The unique hanging system used on this Omega National floating shelf is designed so installers can mount the 100 lb capacity brackets, then slide the shelf body into place for a secure fit. This approach shortens on-site alignment time because the bracket position fixes the shelf plane along the wall. Sanded and ready to finish cherry surfaces let finishers apply stain, paint, or clear coats after installation or before mounting, supporting whichever workflow best fits the shop or jobsite. With a standard 10 inch depth, layout work for studs, adjacent cabinets, and nearby doors stays straightforward, because projection off the wall follows a predictable dimension run after run.
The Omega National curved 42 inch cherry floating shelf fits projects where a single wide span with a soft front profile is desired, such as over base cabinets, between tall cabinets, or along open accent walls. The 10 inch depth lends itself to closet and garage organization plans that place folded clothing, bins, or display pieces close to the wall without dominating the room. Solid wood and wood veneer construction means the shelf can sit confidently in living areas or workspaces where clients expect a genuine wood look rather than a laminate strip. Because the system provides a 100 lb capacity through its hanging brackets, the shelf suits locations that need both visual interest and practical load handling, such as home offices or utility rooms.
The unique hanging system on this 42 inch curved floating shelf is designed to secure the shelf to the wall through 100 lb capacity brackets, which supports repeatable, stable installations along a stud line. Meeting or exceeding BHMA standards for safety and strength gives installers a documented performance level, which matters when specifying floating shelves for occupied spaces. No visible hardware along the front edge or underside keeps the focus on the curved cherry profile, so trim carpenters can run this shelf near detailed casings and still maintain a clean visual. The sanded and ready to finish cherry surface allows finishing teams to match existing cabinets, doors, or trim using their standard coatings, which reduces blending issues between factory tones and site-built millwork. A standard 10 inch depth simplifies creating consistent reveals above counters or below uppers, because it repeats the same projection dimension across multiple wall locations.
The Omega National curved floating shelf is 42 inches wide with a standard 10 inch depth, which provides a generous span for storage while keeping projection from the wall manageable.
The solid wood and wood veneer construction gives a sturdy core and real-wood face, which supports typical wall loading and accepts stains or clear finishes used on surrounding millwork.
The hanging brackets for this curved 42 inch cherry floating shelf have a 100 lb capacity, which supports storage of heavier items while maintaining the floating appearance along the wall.
The subtly curved 8-1/2 inch radius edge softens the front profile, which lets designers add visual interest and break up straight lines without complex carpentry.
The unique hanging system is designed for quick installation and long-term durability, which lets installers mount brackets, set the shelf, and move on with minimal adjustment time.
Meeting or exceeding BHMA standards indicates the shelf and brackets are tested for safety and strength, which supports using this floating shelf in occupied residential or light commercial spaces.
The Omega National 42 inch cherry curved floating shelf offers a 10 inch deep, solid wood and veneer construction with a unique hanging system and 100 lb capacity brackets, so it suits wall layouts that require both visual impact and dependable load performance. Sanded and ready to finish cherry lets you align color and sheen with existing work, making this FSC8142CUF1 model a practical choice when designing continuous cherry runs or accent shelves.
Sold In: 1 Each