NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC81487UF1 to RSFSC81487UF1.
Omega National curved floating shelf gives a 48 inch wide by 10 inch deep storage surface with a subtly curved 8-1/2 inch radius front edge, so runs read modern and intentional instead of square and boxy. The shelf uses solid wood and wood veneer construction, which keeps weight manageable while still providing a true wood working surface. The rift white oak material delivers a straight-grain look that aligns well across multiple shelves, helping long walls track visually. The shelf is sanded and ready to finish, so finishers can stain or clear-coat on the same schedule and with the same products used elsewhere in the project. The standard 10 inch depth works for typical display and light-use storage in living, kitchen, or office layouts without pushing cabinets or trim out of their planned lines.
The floating shelf uses a unique hanging system with dedicated brackets, which supports quick installation because the wall plates and shelf interface are designed to work together for alignment. The 100 lb capacity brackets let installers treat this as a structural shelf for typical display loads rather than a purely decorative ledge. The no visible hardware execution means once the shelf is locked onto the brackets, the wall presents as a clean floating element without exposed support points. Because the shelf is sanded and ready to finish, finish work can follow standard shop or field procedures without stripping or heavy prep, so teams can integrate the shelf into existing finishing lines with minimal handling steps.
The 48 inch width is sized for single-span runs over desks, consoles, or short base cabinets, so installers can center the shelf without additional joinery. The 10 inch depth suits display and light storage in living areas, kitchens, and offices, providing enough surface for books or decor without crowding the room. The rift white oak face brings a straight-grain appearance that reads clean in both traditional and modern layouts, making it straightforward to coordinate with rift or quartered fronts nearby. Because the shelf is part of Omega National Products floating shelves and concealed brackets offering, it fits naturally into projects that already rely on concealed support hardware for a streamlined look.
The subtly curved 8-1/2 inch radius edge controls the front profile from shelf to shelf, so multiple units in a row present the same arc without field shaping. The solid wood and wood veneer construction resists edge damage better than thin-skin alternatives, which supports repeated handling during dry fit and finishing. Since the unique hanging system is engineered for this shelf and its internal cavity, the alignment between bracket and shelf body is predictable from job to job. The 100 lb capacity rating on the hanging brackets gives designers and installers a clear load reference, so they can plan typical decorative use within that capacity. Meeting or exceeding BHMA standards for safety and strength provides an additional performance benchmark when this floating shelf is specified alongside other architectural hardware.
The Omega National curved floating shelf is 48 inches wide and 10 inches deep, which suits many single-span wall locations and aligns with common cabinet and furniture proportions.
The shelf uses solid wood and wood veneer construction with a rift white oak appearance, giving a true wood surface that can be finished to coordinate with other rift oak components.
The hanging brackets for this curved floating shelf are rated for a 100 lb capacity, allowing typical decorative and light storage loading within that weight range.
The curved floating shelf is sanded and ready to finish, so stain, paint, or clear coats can be applied directly according to the project finishing schedule.
The shelf uses a unique hanging system with concealed brackets, so once installed there is no visible hardware and the shelf appears to float cleanly on the wall.
This curved floating shelf meets or exceeds BHMA standards for safety and strength, giving specifiers and installers a recognized benchmark for performance expectations.
The 48 inch by 10 inch Omega National curved floating shelf in rift white oak offers a defined width, depth, and bracket capacity, so designers and installers can plan wall runs, loads, and finishing steps around known values. The subtly curved 8-1/2 inch radius front edge and no visible hardware design provide a clean, modern presentation that ties into other millwork without added profiling work. For projects calling for a floating appearance with BHMA-recognized strength and a sanded, ready-to-finish wood surface, this model gives a straightforward option to specify and deploy.
Sold In: 1 Each