NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC8148MUF1 to RSFSC8148MUF1.
Omega National 48 x 10 curved floating shelf is a solid wood and wood veneer floating shelf designed to add a fresh, modern look with a subtly curved 8-1/2 inch radius edge. That curved front profile softens the edge of a 48 inch span, which matters in tighter walkways or at eye level. The shelf is built as part of a complete turn-key system with a unique hanging system, so the shelf and brackets work together for long-term durability. No visible hardware creates a clean floating effect on finished walls, which helps when styling open wall runs in kitchens, closets, or living areas. The shelf is sanded and ready to finish, allowing installers to stain or paint it to match surrounding cabinetry. That finish-ready surface saves prep time on site, especially when tying into existing millwork.
The standard depth is 10 inches, giving enough projection for typical display or light storage while keeping the load closer to the wall. This proportion supports the 100 lb. capacity hanging brackets because the leverage on the wall is controlled. The unique hanging system ties the concealed brackets to the shelf body, which matters when aiming for long-term durability. No visible hardware at the front edge allows the shelf to sit tight to finished walls for a clean line. The system is designed as a complete turn-key setup, which helps align drilling, hanging, and leveling steps during installation. Meeting or exceeding BHMA standards for safety and strength adds assurance when placing the shelf in active living spaces.
This curved maple floating shelf is built for wall-mounted use where a 48 inch span and 10 inch depth are appropriate. The subtly curved 8-1/2 inch radius edge presents a softer front profile along the full 48 inch width, which works well on open walls in kitchens, closets, or living areas. Solid wood and wood veneer construction pair with 100 lb. capacity hanging brackets, so the wall-mounted assembly is designed to support typical decorative items within that capacity. The no visible hardware design lets the shelf read as a simple floating plank, which helps maintain a minimal aesthetic on painted or tiled walls. Because the shelf is sanded and ready to finish, it can be color-matched on site to nearby cabinetry, trim, or doors for a unified wall presentation.
The unique hanging system is engineered for quick installation, which supports repeatable results across multiple shelves on the same wall. With the 48 inch width and 10 inch depth defined, installers can plan bracket locations and wall blocking around those fixed dimensions. The 100 lb. capacity hanging brackets are sized to work with the solid wood and wood veneer shelf body, so the load is shared between the internal structure and the wall interface. This coordination between shelf and bracket reduces guesswork about fit. Meeting or exceeding BHMA standards for safety and strength means the assembly has been designed with performance benchmarks in mind, which matters when shelves will be used daily. The sanded, ready-to-finish surface lets finishing be the final step, rather than an additional prep stage, which helps streamline the workflow from mounting to final touch-up.
The shelf is 48 inches wide with a standard 10 inch depth, so it spans a typical cabinet run while staying close enough to the wall for stable support.
The 100 lb. capacity hanging brackets are designed to support loads up to that rating, which suits typical decorative or light storage use on wall runs.
The shelf uses solid wood and wood veneer construction, providing a sturdy body that works with the concealed brackets for long-term durability in normal use.
The shelf uses a unique hanging system with no visible hardware, so once mounted it reads as a clean floating board against the wall.
The shelf is sanded and ready to finish, allowing installers to stain or paint it to match existing cabinetry or trim on site.
Meeting or exceeding BHMA standards indicates the shelf and hanging system are designed around recognized safety and strength criteria for mounted components.
This Omega National floating shelf combines a curved 8-1/2 inch radius edge, 48 inch width, and 10 inch depth with a 100 lb. capacity hanging system. That mix supports modern, hardware-free wall runs where strength and a clean front profile both matter. The shelf arrives sanded and ready to finish, so stain or paint can be matched to surrounding work. For projects calling for a concealed bracket floating shelf that meets or exceeds BHMA standards, this maple option fits straight into a professional wall layout.
Sold In: 1 Each