Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National M46 Series L-moulding provides the structural rail that holds stemmed glasses suspended by their bases inside a cabinet, turning an otherwise unused shelf or upper cabinet space into organized, protected stemware storage. Each box contains four 62-inch lengths of unfinished hard maple, ready to be cut to fit and finished to match the surrounding cabinetry.
The upper section of a wall cabinet or the underside of a fixed shelf tends to go unused in most kitchens. Mounting a pair of L-moulding rails on that surface converts it into suspended stemware storage where glasses hang inverted by their bases, protected from dust and kept off the shelf surface. The L-profile does the mechanical work: the horizontal leg of the profile slides into a routed or rabbeted channel, and the vertical leg forms the retaining lip that holds each stem in place. The result is a clean, integrated look that reads as a cabinetry detail rather than an add-on accessory.
The moulding is hard maple, a tight-grained domestic hardwood that machines cleanly, holds a sharp profile edge, and takes finish evenly. Because it arrives unfinished, the moulding can be stained to match maple, cherry, or painted cabinetry before installation, or finished in place after fitting. The 1-3/4 inch width and 3/4 inch height give the rail a profile substantial enough to be routed or dadoed into a shelf without losing structural integrity. Cabinet shops and finish carpenters working on custom or semi-custom kitchens will find the stock dimensions consistent and workable with standard tooling.
Custom cabinet shops building wine bars, butler's pantries, or entertainer kitchens specify this moulding when the design calls for integrated stemware storage rather than a surface-mount rack. Kitchen designers use it to spec a detail that disappears into the cabinetry once finished. Homeowners completing a cabinet renovation who want a built-in look for glass storage, rather than a hanging rack bolted to a shelf bottom, will find the unfinished maple easy to work with standard shop tools. The four-piece box quantity suits both single-cabinet installs and larger runs across multiple bays.
No mounting hardware is included. The moulding is a raw wood profile intended to be cut, finished, and installed using standard cabinetry methods such as routing, rabbeting, or direct fastening based on the cabinet construction.
Yes. Because the moulding is unfinished hard maple, it accepts paint, stain, or clear topcoat. Maple's tight grain makes it a good candidate for a smooth painted finish.
Stemware installations typically use two parallel rails spaced to match the base diameter of the glassware being stored. The four pieces in this box are enough to set up multiple bays or a longer single run.
This moulding is part of the Omega National M46 Series, which is a dedicated stemware moulding line. Check the series designation when combining with other Omega stemware components to confirm profile compatibility.
Four lengths of hard maple L-moulding, ready to cut and finish, give a custom cabinet build the integrated stemware rail it needs without visible hardware or surface-mount hardware compromises.
Sold In: 1 Package