Omega National 62" L-Moulding for Stemware, Maple - BOX/12, M4600MUF2

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSRL62MA to RSSRL62MA.

Omega National L-Moulding Maple For Stemware Runs

Omega National L-moulding maple defines the finished edge of a stemware storage run, using a solid wood, L-shaped end piece profile that visually terminates the rack. The L-shaped (end piece) profile creates a clear edge, which helps separate hanging glassware from adjacent cabinet components. This moulding is part of Omega National Products wine bottle and stemware storage solutions, so it is sized and styled for typical kitchen and bar stemware applications. The moulding is manufactured in unfinished solid maple, giving shops and installers a neutral hardwood that can be stained or top-coated to align with surrounding cabinetry. Both the L-shaped profile and its paired T-shaped profile are specified at 62 inches in length, so a single stick spans most under-cabinet stemware runs without extra joints. This length-oriented design supports custom installation layouts where runs are cut to fit.

Solid Maple Stemware Moulding Details For Shops

• The L-shaped (end piece) profile establishes the termination of a stemware rack run, so installers can create a clean finished edge at the open side of the storage area.
• The T-shaped (middle piece) profile is available in the same system, allowing longer wine bottle and stemware storage runs to be supported between end pieces in a coordinated way.
• Both profiles are 62 inches in length, giving fabricators a continuous blank they can cut down to match specific cabinet widths or bar layouts without short offcuts.
• The moulding is specified as unfinished solid maple, which lets finish shops apply their own stain and topcoat systems to match existing cabinet doors or face frames.
• The product falls under wine bottle and stemware storage, so its geometry and proportions are aimed at typical stemware rack environments in kitchen and bath cabinetry.

Stemware L-Moulding Installation And Fit Considerations

This L-moulding is described as 62 inches in length, so layout starts from that maximum span and then trims to the working opening required for the stemware rack. Because the profile is L-shaped, one leg of the moulding aligns as the visible edge while the other leg serves as the return into the cabinet or panel, which influences how much material is left for fastening surfaces during installation. The moulding is identified as unfinished solid maple, so all field cuts expose the same species and can be sanded and finished along with the rest of the run for a uniform appearance after mounting. As part of wine bottle and stemware storage, the profile geometry is suited for edging stemware rack assemblies under cabinets or in bar cabinets.

Using Maple L-Moulding In Stemware Storage Runs

Where Omega National L-Moulding Maple Fits Best

This L-moulding is classified under kitchen and bath cabinet accessories for stemware racks, which positions it for use on under-cabinet or in-cabinet wine glass storage installations. The wine bottle and stemware storage product class connects this moulding to assemblies that support hanging glassware and related bottle storage in residential or light commercial cabinetry. Because both the L-shaped and T-shaped profiles are 62 inches in length, installers can treat them as modular components that adapt to a wide range of cabinet spans without changing systems between short and long runs. The L-shaped profile is described as an end piece, so it naturally fits at the outer edges of a run where the stemware storage needs a defined stop and a finished visual boundary against open room space.

Why M4600MUF2 Details Support Repeatable Results

The manufacturer part number M4600MUF2 ties directly to an L-moulding in maple, which helps shops specify the exact end piece profile when ordering for repeat jobs, reducing mismatches between middle and end pieces. The unfinished solid maple construction means every stick arrives ready for the shop's own finishing schedule, so finish color and sheen can be repeated across multiple projects without being constrained by prefinished stock. The consistent 62 inch length across the L-shaped and T-shaped profiles simplifies cut lists, because the same starting dimension applies whether building a short under-cabinet rack or a longer bar run. Being described specifically as moulding for stemware within wine bottle and stemware storage keeps its role clear in project documentation, so it is selected where glassware storage edging is required rather than general trim.

Stemware L-Moulding Maple Questions From Installers

Select Maple L-Moulding For Stemware Projects

This Omega National L-moulding in unfinished solid maple gives cabinet shops a dedicated end piece for wine bottle and stemware storage runs, with a specified 62 inch length that trims to typical cabinet spans. The L-shaped profile is defined as an end piece for stemware racks, so it aligns with layouts where a clean edge is needed at the side of a bar or cabinet opening. By using the M4600MUF2 part number when planning and ordering, projects can repeat the same species, length, and profile across multiple kitchens or bar installations with consistent visual results.