Omega National 62" T-Moulding for Stemware, Cherry - BOX/12, M4640CUF2

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPSRT62CH to RSSRT62CH.

Omega National T-Moulding For Stemware Storage Runs

Omega National T-moulding for stemware gives cabinetmakers a dedicated middle-piece profile for building continuous stemware storage runs in kitchen or bar cabinetry. This T-shaped profile is part of Omega National Products wine bottle and stemware storage line, so it ties directly into purpose-built layouts for hanging glassware under upper cabinets. The molding is 62 inches in length, which supports longer uninterrupted sections and allows custom cutting for shorter spans during fabrication. The cherry T-moulding is one of five unfinished solid wood species offered in this molding program, so the raw surface is ready for your shop finishing schedule to match adjacent casework or trim. Sold by Wurth Baer Supply in both broken and full box quantities, this specific model, M4640CUF2, is supplied as a cherry T-shaped middle piece, while matching L-shaped end piece profiles are available separately within the same system for finishing each run.

Key T-Moulding Details That Support Your Build

• The T-shaped middle piece profile is designed as the center section in a stemware rack run, so it carries the glassware field while other profiles handle termination points at each end.
• Omega National lists this cherry molding as part of a two-profile system, with T-shaped middle pieces and L-shaped end pieces, so you can plan the entire rack layout from matching components.
• Both molding profiles are specified at 62 inches in length, giving you extra material to cut to exact cabinet widths, handle multiple short runs from one stick, or align seams at convenient locations.
• The cherry version is one of five unfinished solid wood species in the line, so you can sand, stain, or clear-finish along with doors, face frames, or bar trim for consistent appearance.
• Wurth Baer Supply offers this M4640CUF2 model in both broken and full box quantities, allowing shops to order for a single custom job or repeat production work while accessing available full-box discounts.

Cherry T-Moulding Installation And Fit Considerations

This Omega National cherry T-moulding is defined as a T-shaped middle piece profile, which identifies its role in the stemware rack assembly and how it fits between end treatments. Because both the T-shaped middle piece and L-shaped end piece moldings share a 62 inch length, layout can be scaled by cutting pieces from full sticks to match cabinet interiors or bar runs. The unfinished solid wood cherry construction means the molding integrates into typical cabinet finishing workflows, with preparation and finish steps handled along with other wood components in the job. As a dedicated part of a wine bottle and stemware storage program from Omega National Products, the profile geometry is set up specifically for stemware applications rather than general trim work, guiding where it is positioned within the cabinet underside or rack assembly.

Using Omega National Cherry T-Moulding In Projects

Where This T-Moulding Fits In Stemware Racks

This M4640CUF2 cherry T-moulding is identified as the T-shaped middle piece profile within Omega National stemware rack moldings, so it is intended to occupy the central span of a stemware storage run. Within a typical wine bottle and stemware storage layout, this T-profile works alongside separate L-shaped end piece moldings from the same series, placing the T-profile inboard while the L-profiles finish exposed ends or transitions. The 62 inch length aligns well with standard cabinet and bar sections, letting you size the middle piece to run nearly full width beneath upper cabinets or bar soffits. Because it is classified specifically under stemware racks and wine bottle and stemware storage, its fit is oriented to hanging glassware zones rather than general-purpose edge molding.

Why Length, Profile, And Species Matter In Use

The 62 inch length on this Omega National cherry T-moulding gives fabricators flexibility to pull multiple shorter middle pieces from a single stick, which supports efficient material use on multi-cabinet runs. Using a T-shaped middle piece profile defined by Omega National Products means the cross-section is engineered to coordinate with the companion L-shaped end piece, simplifying alignment where profiles meet. The unfinished solid wood cherry construction lets finishing crews treat the molding like other cherry components on the job, so color and sheen can be dialed in across doors, face frames, and under-cabinet stemware racks. Being part of a dedicated wine bottle and stemware storage product class from Omega National helps designers keep this component matched to other storage elements in the same program, maintaining a consistent look and role in the overall installation.

Common Questions About Omega National T-Moulding

Select Omega National Cherry T-Moulding For Stemware Runs

The Omega National T-moulding for stemware in unfinished solid wood cherry, model M4640CUF2, gives you a defined T-shaped middle piece profile for dedicated stemware rack runs. With a 62 inch length and solid cherry construction, it integrates into wine bottle and stemware storage layouts that call for custom-cut spans and coordinated finishing. Sourcing through Wurth Baer Supply, you can align quantity with project scale while keeping this cherry T-moulding consistent with other Omega National stemware rack components across your cabinet or bar installations.