Omega National 62" T-Moulding for Stemware, Maple - BOX/12, M4640MUF2

Unfinished Maple Stemware Molding for Custom Cabinet Wine Glass Storage

This Omega National M46 Series stemware molding is a 62-inch maple wood strip that mounts beneath a wall cabinet or shelf to cradle and suspend wine glasses by their bases, adding wine glass storage without a separate rack unit. Sold in a box of 12 strips, it is supplied unfinished and ready to accept stain, paint, or topcoat to coordinate with surrounding cabinetry.

Key Features

• Maple wood construction gives the molding a tight, consistent grain that accepts stain evenly for a finished look that blends with wood cabinetry.
• 62 inches long spans a standard wall cabinet run or can be cut to fit a shorter opening.
• 3-inch width and 3/4-inch profile provides the channel depth needed to cradle stemware bases securely.
• Unfinished surface allows a stain, paint, or clear topcoat match to the surrounding cabinet finish.
• Box of 12 strips supplies enough molding to outfit multiple cabinet sections or a full kitchen run in one order.
• M46 Series from Omega National integrates with other Omega cabinet wood components for a coordinated interior build.

Turning Unused Cabinet Space into Stemware Storage

The slot in a stemware molding holds a wine glass by its base so the bowl hangs free, keeping the glass stable and protected from contact on a hard shelf. Installing this molding along the underside of a wall cabinet puts stemware within reach over a bar area, a kitchen island, or a countertop wine station without consuming any shelf or counter space. Because the strip runs 62 inches, a single length covers the full width of most wall cabinet sections, and multiple strips can be run end to end across a longer cabinet bank.

Wood Species and Finishing

Maple is chosen for this molding because its fine, close grain produces a smooth, uniform surface that takes finish predictably, making it easier to match to stained or painted cabinet interiors. The strip arrives unfinished, which means the installer controls the final appearance. A clear polyurethane keeps the natural maple tone. A stain brings it into a darker wood scheme. A painted finish ties it to a two-tone or all-painted interior. The 3/4-inch profile gives the molding enough body to hold fasteners and support loaded glasses without flex along the run.

Who Reaches for This Strip

Cabinet shops building custom or semi-custom kitchens with a bar section specify this molding when the client wants integrated stemware storage that reads as part of the cabinetry rather than a bolted-on accessory. Designers finishing a wet bar or butler's pantry use it to create a clean hanging display for everyday wine glasses. The box quantity works best when outfitting an extended cabinet run or multiple cabinets in a single project, so the strips finish consistently from the same lot. Homeowners adding a wine glass holder to an existing cabinet can cut the 62-inch strip to the needed length with standard woodworking tools.

Common Questions

Integrated Stemware Storage, Finished Your Way

Specify this maple stemware molding when the project calls for wine glass storage that looks like it belongs in the cabinetry, finished to match, and scaled to a full cabinet run.