Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National M46 Series L-moulding gives a wall cabinet a built-in stemware rack, suspending wine glasses by their bases so stems hang free and the glasses stay organized. The 62-inch length covers a wide cabinet run, and the alder wood arrives unfinished so it can be stained or painted to match the surrounding cabinetry before installation.
The L-profile mounts to the underside of a wall cabinet shelf and creates a row of slots that hold wine glasses by their bases, leaving the stems and bowls hanging down. This keeps glasses off the shelf surface, reduces the risk of tipping, and converts otherwise unused upper cabinet space into stemware storage. Because the molding runs a full 62 inches, it works across a wider cabinet than a shorter strip allows, and a box of four pieces covers the most common multi-section layouts without a return trip for more stock.
Alder is a close-grained domestic hardwood that takes stain predictably and with minimal blotching, which makes it a practical choice when the molding needs to match an existing interior finish. The pieces arrive bare wood with no factory finish applied, so the installer controls the final color and sheen. Sand lightly, apply the chosen stain or paint, and mount once the finish has cured. Alder pairs naturally with lighter cabinet interiors and with species that share a similar grain scale, though it finishes well under most stain colors.
This molding suits a cabinet shop building wine or bar cabinetry with a dedicated stemware section, a kitchen designer specifying integrated glass storage above a wet bar or beverage center, or a homeowner upgrading a wall cabinet to keep a set of wine glasses organized and accessible. The 62-inch run and four-piece pack make it most practical for projects where several linear feet of stemware capacity are needed in one pass. For shorter single-cabinet applications, a shorter strip in the same series may be the better fit.
No. These pieces are bare alder wood, ready to receive the stain, paint, or clear coat of your choice before installation.
Each box contains four 62-inch pieces of L-moulding.
The slot dimensions are set by the L-profile geometry of the M46 Series. Check the base diameter of the specific stemware against the profile before specifying for an unusual glass size.
Alder molding cuts cleanly with standard woodworking saws, so trimming to fit a shorter opening is straightforward before the finish is applied.
Specify this alder L-moulding where the goal is a long, clean run of built-in stemware storage that blends into the cabinet rather than sitting on top of it.
Sold In: 1 Package