Signature Straight Raised Panel 48" Wide Wall Hood, Hickory, R21B48SMB1HUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR21B48SMB1HUF1 to RSR21B48SMB1HUF1.

Omega National Hickory Wall Mount Range Hood Use

Omega National 48 inch Hickory Range Hood is a Signature Straight Raised Panel wall hood that forms the visual centerpiece of a wood range hood installation, which matters when the cooking zone needs a defined focal point above the range. The 48 inch width establishes coverage for wider cooking areas, so the hood structure spans the full run where cabinets and cooking equipment align. Hickory construction gives the hood a distinct wood species identity, supporting projects where matching hickory cabinetry or trim is part of the design intent. The straight raised panel design creates a framed profile on the hood face, giving the cabinet run a structured, traditional look instead of a flat front. As a wall hood, this unit is built for mounting on a wall over the range area, supporting typical kitchen layouts where the range backs to a wall rather than an island.

Key Details Of This Wood Range Hood

• The Signature Straight Raised Panel design defines the front profile of the hood, so installers can coordinate it with raised panel cabinet doors when a consistent style across the full wall run is required.
• The 48 inch wide wall hood format sets a known width for layout, simplifying wall cabinet spacing when planning a centered hood over a 48 inch cooking surface or similar appliance group.
• The hickory material designation identifies this hood as matching hickory cabinet programs, helping shops align stain systems and finishing schedules across doors, face frames, and this hood shell.
• The Omega National wood range hood product class positions this unit within wood range hoods, which helps designers group it with other wood components in kitchen and bath cabinet projects.
• The R21B48SMB1HUF1 manufacturer part number provides a precise identifier, supporting ordering repeat jobs or matching this exact hood model across multi-unit or phased projects.

Wall Mount Range Hood Fit And Layout

This Signature Straight Raised Panel 48 inch wide wall hood is specified as a wall mount range hood, so it is intended to sit against a wall surface above the cooking area in a typical kitchen layout. The 48 inch width gives designers a fixed dimension to center over the range or cooktop, which simplifies cabinet spacing on each side. The straight raised panel face aligns visually with raised panel cabinet doors, allowing a continuous door-and-hood rhythm across the wall run. Hickory as the named wood species lets finish shops plan stain, clear, or glaze systems around that substrate, important when matching neighboring hickory doors, drawer fronts, and trim.

Using This Signature Straight Raised Panel Hood In Projects

Where This Hickory Wall Hood Fits Best

This Omega National 48 inch Hickory Signature Straight Raised Panel wall hood fits projects that specify wood range hoods as visible cabinetry elements in kitchen or bath spaces. The 48 inch width aligns with wider cooking equipment footprints, so it suits designs where a larger range or multi-burner cooktop needs a proportional hood structure above. As a wall mount hood, it works in layouts where the range is on a wall run rather than on an island, giving installers a clear wall-based reference for positioning and cabinet alignment. The straight raised panel styling means it fits into schemes that already use raised panel doors on wall and base cabinets, so the hood continues that door style across the cooking zone. Hickory construction supports projects where hickory cabinets or paneling are part of the specification, keeping wood tone and grain character consistent around the hood area.

Why The Verified Details Support Consistent Results

The stated 48 inch width gives cabinet shops and installers a dependable size when building adjacent cabinets or fillers, which helps reduce layout rework once the hood position is established on the wall. The Signature Straight Raised Panel description defines the panel geometry on the hood face, so door programs, molding details, and end panels can be selected to echo that raised profile and maintain a coherent elevation. Hickory as the specified species tells finish departments exactly which wood they are working with, which aligns sanding, staining, and color-matching routines with the rest of a hickory-based job. Classifying this as a wood range hood and a wall hood clarifies its role in the cabinet package, allowing job drawings to treat it as part of the wall cabinet sequence instead of as a separate metal unit. The manufacturer part number R21B48SMB1HUF1 ties all these characteristics to a single code, so reorders and field replacements can repeat the same hood without dimension or style drift.

Common Questions About This Hickory Wall Hood

Selecting This Hickory Wall Hood For Your Project

This Omega National 48 inch Hickory Signature Straight Raised Panel wall hood gives a defined 48 inch wood range hood solution for wall-mounted cooking layouts. The hickory construction and raised panel styling align with hickory raised panel cabinet programs, helping shops plan cohesive elevations. Using the R21B48SMB1HUF1 identifier connects design drawings, shop orders, and field installation around the same hood model, supporting consistent results across single kitchens or multi-unit jobs.