NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR21B48SMB1MUF1 to RSR21B48SMB1MUF1.
Omega National 48 inch maple wall hood describes a wall-mounted wood range hood that sets the visual center of a 48 inch cooking run while defining the upper cabinet line. The Signature Straight Raised Panel style establishes a framed, raised-panel profile, so installers can coordinate the hood face with surrounding door styles for a unified bank of cabinets. The maple construction ties directly into common cabinet woods, allowing finish shops to stain or coat the hood to match adjacent casework. As a wood range hood in the Kitchen & Bath Cabinet Accessories category, this unit is designed to integrate into built-in cabinetry rather than stand apart like a metal appliance, which helps cabinetmakers control sightlines. The wall hood format supports layouts where the cooking surface is on a wall instead of an island, giving designers a clear, fixed point for upper cabinet terminations and molding details.
The 48 inch wood range hood maple width defines a fixed span that installers can build around when setting wall cabinet dimensions and fillers. Because this unit is specified as a wall mount range hood, it is intended to anchor directly to a wall structure, which allows cabinet runs to terminate cleanly against its sides. The Signature Straight Raised Panel configuration provides a predictable front geometry, giving trim carpenters clear reference points for crown, light rail, or finished ends. With the hood categorized as a wood range hood, shops can work it with typical woodworking tools, so trimming adjacent panels or aligning face frames follows standard cabinetmaking workflow.
The Signature Straight Raised Panel wall hood is suited to projects where the cooking zone is designed along a wall and framed by cabinetry. As a wood range hood within the Kitchen & Bath Cabinet Accessories class, it functions as a built-in component of the cabinet package rather than a standalone appliance, which lets design teams specify it along with doors, drawer fronts, and moldings. The 48 inch width works for wider ranges or cooktops, so planners can center the hood on the appliance and size adjacent wall cabinets accordingly for a continuous look. Because the hood is built from maple, it aligns well with kitchens that already use maple casework, giving finish departments a consistent substrate when applying stains, paints, or clear coats around the cooking area.
The Signature Straight Raised Panel profile provides a stable, repeatable face geometry, so multiple installations of the same R21B48SMB1MUF1 range hood can share identical sightlines across different jobs. The Omega National 48 inch maple wall hood specification ties design intent directly to a single part number, which helps shops standardize cut lists and cabinet widths around a known hood footprint. As a wall mount range hood, it creates a clear vertical alignment point for tile terminations, backsplashes, and wall cabinet bottoms, simplifying layout decisions at installation. The maple construction allows fabricators to sand, edge, and finish the hood with the same processes used for nearby cabinet components, which supports consistent color and sheen across the full kitchen elevation.
The R21B48SMB1MUF1 hood is a 48 inch wide Signature Straight Raised Panel wood range hood, so it serves as a built-in focal point above a cooking area.
This Omega National wood range hood is specified at 48 inch width, giving designers a clear span to center over a range and coordinate cabinet sizes.
This maple hood is identified as a wall mount range hood, so it is intended for installations where the cooking surface is located on a wall run.
The Signature Straight Raised Panel style provides a framed face profile, helping installers align adjoining cabinet doors and trim to maintain even reveals.
The maple material matches common cabinet construction, allowing finish shops to apply their usual maple stains or coatings for a coordinated appearance.
The R21B48SMB1MUF1 part number uniquely identifies this hood configuration, helping shops repeat successful designs by ordering the same model again.
The Omega National 48 inch maple wall hood specification gives installers and designers a defined 48 inch wood range hood maple footprint to build into a wall layout. The Signature Straight Raised Panel face ties visually to traditional cabinet door styles, helping maintain a continuous look across upper cabinets and the hood area. With maple construction and a dedicated R21B48SMB1MUF1 identifier, this wall mount range hood can be specified confidently as part of a coordinated cabinet package on upcoming kitchen projects.
Sold In: 1 Each